You are viewing the article How to Clean Hot and Cold Water Plants at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Melanie Garcia. Melanie Garcia is the co-owner of Oranges & Lemons, a small cleaning service company based in downtown LA that has been in business for over 40 years. Oranges & Lemons is a partner of organizations such as the National Domestic Workers Alliance and the Hand in Hand: Domestic Employers Network.
There are 7 references cited in this article that you can see at the bottom of the page.
If you use hot and cold water plants, you need to clean them periodically. The U.S. Department of Energy recommends that users clean the hot water plant when changing the tank or every six weeks, whichever comes first. Keeping the water clean is the most important part of hot water plant maintenance. Fortunately, cleaning hot and cold water plants is quite quick, you only need water and bleach or vinegar. [1] X Research Source
Steps
Prepare cleaning solution
- Stir the solution gently. If possible, you should wear disposable gloves. Do it in a place where a little spillage is okay, such as in a large sink. [2] X Research Source
- Note: vinegar only gives about 80-90% cleaning effect compared to chlorine bleach (Javen water). Although bottled drinking water contains very small amounts of bacteria, they can still grow over time if not thoroughly cleaned. [3] X Research Sources
Clean hot and cold water plants
Advice
- If necessary, you can replace bleach or vinegar with an appropriate antibacterial cleaning solution. Soap sometimes kills bacteria better than vinegar. However, if you use soap, you should wash the machine more times to completely clean it.
Warning
- A water bottle should not be used for more than 30 days. Like any food, bottled water also harbors bacteria. Although the amount of this bacteria is small, it can multiply and grow for a long time.
- Minimize touching the mouth of the faucet to avoid contaminating other people’s drinking water.
This article was co-written by Melanie Garcia. Melanie Garcia is the co-owner of Oranges & Lemons, a small cleaning service company based in downtown LA that has been in business for over 40 years. Oranges & Lemons is a partner of organizations such as the National Domestic Workers Alliance and the Hand in Hand: Domestic Employers Network.
There are 7 references cited in this article that you can see at the bottom of the page.
If you use hot and cold water plants, you need to clean them periodically. The U.S. Department of Energy recommends that users clean the hot water plant when changing the tank or every six weeks, whichever comes first. Keeping the water clean is the most important part of hot water plant maintenance. Fortunately, cleaning hot and cold water plants is quite quick, you only need water and bleach or vinegar. [1] X Research Source
Thank you for reading this post How to Clean Hot and Cold Water Plants at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: