You are viewing the article What is Toshiba washing machine ED error? The exact cause and how to fix it at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
Toshiba washing machine ED error often makes users feel uncomfortable when using. This error is often related to the control circuit, so it sometimes makes it difficult to find a way to fix it. Refer to the following article to know the cause, the safest way to fix it!
What is Toshiba washing machine ED error?
Toshiba washing machine ED error is usually an error related to the control circuit part . When starting the washing machine, the display will beep ” beep ” and the word ED will be displayed. That is, the washing machine has detected an abnormal error on the control board.
Cause of Toshiba washing machine error ED
Toshiba washing machine error ED has many causes, mainly due to the following reasons:
- The power supply to the washing machine is weak and unstable : The power supply is not enough to load the machine to operate, it is easy to burn parts, consume energy, and do not work.
- Washing machine broken board : This is a very serious technical problem. You need to contact someone with high technical expertise.
- The signal wire from the board to the power system is faulty : It can be broken, due to long-term use, bitten by a mouse or insect.
- Communication error of the two circuits together.
How to fix Toshiba washing machine ED error
To fix the ED error quickly and simply on your Toshiba washing machine, follow these steps:
- Step 1 : Unplug the washing machine from the power source and restart the machine.
- Step 2 : The board jack may be damaged due to long-term use or not cleaning, leading to oxidation. Use a specialized cleaning solution to clean the oxidized place on the jack.
- Step 3 : The board is damp, remove the board and dry it by using a hair dryer blowing directly or exposing it to the sun.
- Step 4 : The board is faulty due to various reasons. However, mainly the microprocessor IC does not level offset. Then check the machine.
- Step 5 : If the machine fails to load, it is related to the board. Please seek the help of a professional technician.
- Step 6 : If the washing machine is placed in a low place, the circuit is faulty. Before calling a repairman, dry the board again, and move the washing machine to a drier location.
Hope the above article will help you fix Toshiba washing machine ED error. If you have any questions, please leave a comment below for the fastest response!
Thank you for reading this post What is Toshiba washing machine ED error? The exact cause and how to fix it at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: