What is the drill slide level? Importance and some notes when using

Drilling machines are commonly used in mechanical engineering, construction, etc. In which, drilling machine slide level is of interest to many users because it directly affects the ability to work. Find out what the drill slide level is in this article!

What is the drill slide level?

Drill slide level is the torque level of the drill when operating on material surfaces. Torque is the tightening force , also known as the tightening of the drill bit against the surfaces they are impacting on.

The drill slide level is an important parameter and should be adjusted when using the drill’s screwing mode. The slip level on each battery drill will come with a different torque, the unit is Nm .

The sliding level of the Bosch GSB 120-LI 12V battery dynamic drill is the torque level when the machine is in operation

How important is drill slide level?

• Protect the screw head : You can only screw the screw at the torque level as set, so that the screw head will not be damaged, affecting the operation of the machine later as well as the aesthetics of the material surface. catch screws.
• Ensure stable operation of the drill : When operating in screw driving mode, the drill slide level will combine with the idle speed to adjust the speed, helping to manipulate the work accurately and quickly, bringing to the best results. High work efficiency and increased equipment durability.

Slide level of Ingco CDLI1221 12V battery screwdriver helps protect the screwdriver head, the machine works more stable

Some notes when using the slide level of the battery drill

• You need to adjust the slip level to match the type of screw and the hardness of the material surface. If the slide level is set to be lighter or too strong, it will affect the aesthetics of the surface of the material, and also reduce the machine’s performance and durability.
• When the slip level reaches the maximum, it is necessary to stop drilling and re-adjust the appropriate tightening force.
• You should not adjust the sliding level continuously, only change when necessary and stop when you want. You need to minimize the situation of rotating the machine sliding level continuously when the device is working because it will affect the operation of the machine.

When using the Ryobi CLD-120 12V battery screwdriver, you should adjust the slip level to match the type of screw and the surface hardness.

The above article has helped you find out what is the level of a drill slide? Importance and some notes when using. If you have any questions about the drill, please leave a comment below to be answered by lassho.edu.vn!