What is Sharp washing machine E2 error and how to fix it in detail

Your Sharp washing machine is starting the washing mode but there is no water supply or when operating in the spin mode, the water comes out most of the time? See now what is Sharp washing machine E2 error and how to fix the error in detail in the following article to fix the above situation!

What is Sharp washing machine E2 error?

When the washing machine initiates the washing mode but the water is not supplied or the machine is operating in the spin mode, the water in the drum almost drains out, the screen shows E2 error, which means that the Sharp washing machine has made an E2 error.

Causes of Sharp washing machine E2 error

The machine is in washing mode but no water is supplied

You select the washing mode on the washing machine but do not see the water being supplied to the washing machine to perform the selected setting. Instead, the machine emits an extremely annoying beeping sound.

The machine is in spin mode but suddenly stopped

When the machine is performing the spinning mode, it suddenly stops, and the water in the drum is almost completely drained out, the screen displays an error E2.

How to fix Sharp washing machine E2 error

Each washing machine line will have a different structure and design. Therefore, they also have different ways to fix errors, please take a look at how to fix them below!

For top load washing machines

First, remove the plastic piece on the back of the machine right where the water supply faucet is to check the door switch. Door switches usually have 2-3 wires connected to 2 iron leaves , when the washing machine operates, these 2 iron leaves will pass through each other.

Therefore, if the cord of the washing machine is too old or bitten by a mouse, the 2 iron leaves will no longer connect. At this point, you just need to connect the wires of the same color together.

And if you find that when closing the door of the washing machine, the 2 iron leaves do not stick together and the switch is broken , replace the new switch and turn off the 2 wires together.

For front load washing machines

Front loaders have a much more complicated door switch than top loaders. Therefore, to fix error E2 you need to contact a warranty center or a reputable washing machine repair center with high technical knowledge to be checked and fixed!

The above article has shared with you information about what Sharp washing machine E2 error is and how to fix it in detail. Hope the above article can provide you with useful knowledge, if you have any questions, please leave a comment below for us to answer!