You are viewing the article What is Safe Mode? How to enter safe mode on Android phones and Windows 10 laptops at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
Safe mode is a mode that appears to save your phone or computer when your device suddenly fails and turns off suddenly. So what is this feature more specific and what is the use of setting safe mode? Find the answer in the article below!
What is Safe Mode?
Safe mode (safe mode) is a mode that helps Windows computer devices and Android phones restart with minimal services for users to check and diagnose the device is failing to fix the error. .
When this mode is active, unrelated software will not work, thus preventing the virus from spreading throughout the device.
Thus, in case the computer fails without finding the cause, safe mode is the preferred choice.
What does Safe Mode do?
Although not activating all software, in safe mode users can still use useful software such as antivirus to scan harmful programs, there are malware that cannot be destroyed in normal mode. in safe mode will be seen and removed.
Users can also run a system restore (Restore System) to bring the system back to normal operation as before.
In addition, safe mode also allows users to remove strange software installed on the machine and upgrade hardware drivers. Old and outdated hardware drivers are also a cause of errors on the machine.
Instructions on how to enter Safe Mode
On a Windows 10 computer
1. Use the keyboard shortcut Shift + Restart
Hold down the Shift key and click Restart on the login screen to enter the operating system to enter the safe mode interface.
– In the window choose an option > Troubleshoot > Advanced options .
– In Advanced options > continue to click see more recovery options > Startup Settings .
– Click Restart , now the computer will restart and switch to the safe mode interface.
After Windows 10 restarts again, you can select the option you want to enable. To enter Safe mode, there are three different options:
- Standard Safe Mode : press the 4 key or the F4 key on your keyboard to boot.
- Safe Mode with Networking: press 5 or F5 key.
- Safe Mode with Command Prompt : press 6 or F6 key.
2. Interrupt Windows Startup
If Windows 10 fails to start normally three times, the fourth time it will default to Automatic Repair mode. Using this mode, you can boot into safe mode.
Use the Reset button or the Power button on Windows 10 to interrupt before it completes booting. If using the Power button, hold the button for at least 4 seconds to turn off the power.
– After Windows 10 enters Automatic Repair mode, a message appears indicating that it is preparing to enter automatic repair mode as shown below.
– You may then be asked to choose an account to continue. Select an account with administrator rights and enter a password.
– Wait for Windows 10 to try to diagnose your PC automatically.
– On the Automatic Repair window, select Advanced options .
Continue to perform the same steps as method 1: in the Advanced options window, click see more recovery options , select Startup Settings.
Click Restart , the computer will restart and switch to the safe mode interface, choose one of three boot options.
3. Use the Windows 10 installation drive and the command prompt
With the Windows 10 installation DVD, users can use it to enter safe mode. After inserting the disc into the reader tray, an installation message screen will appear, select Next .
– Click or tap the link that says Repair your computer in the lower left corner of the screen.
– Select Troubleshoot in the options that appear.
– In the Advanced options window, continue to click Command Prompt.
– Inside the Command Prompt window, type the command: bcdedit /set {default} safeboot Minimal . Press Enter on the keyboard and then a message pops up saying the operation completed successfully.
– Close the Command Prompt window and select Continue to continue installing Windows 10.
– After the PC restarts, Windows 10 starts to enter safe mode. Log in with a user account with administrator privileges and make the desired changes.
4. Use a system recovery USB drive
– After plugging in the installation USB, a message pops up allowing you to choose a keyboard layout.
– After selecting the keyboard layout, the installation options screen will appear, click Troubleshoot . After this step, repeat the steps above, select Advanced options > Startup Settings > Restart . Choose one of the 3 boot options to enter safe mode.
5. Use the System Configuration tool (msconfig.exe)
– In the search field from the Windows 10 taskbar, type the word System Configuration . Then click or tap the System Configuration shortcut.
– On the System Configuration working window, click the Boot tab. In Boot options , select Safe boot . Click OK to complete the command.
– Windows 10 will show a notification that needs to restart the computer for the new settings to take effect. After booting, your device will automatically boot into safe mode.
6. Use Shift and Restart on Windows 10 Menu
– First, press and hold the SHIFT key on the keyboard, while simultaneously pressing the Start button, then the Power button, then Restart .
– Windows 10 restarts and asks the user to choose an option. Select Troubleshoot .
– Continue to perform the same steps as above: in the Advanced options window, click see more recovery options , select Startup Settings . Click Restart , the computer will restart and switch to the safe mode interface, choose one of three boot options.
7. Use the Settings app
– Type Press Windows key + I > Settings > click Update & Security .
– In the left column click on Recovery > look to the right at Advanced Startup > click Restart now .
– Windows 10 restarts and asks the user to choose an option. Select Troubleshoot .
– Continue to perform the same steps as above: in the Advanced options window, click see more recovery options , select Startup Settings . Click Restart , the computer will restart and switch to the safe mode interface, choose one of three boot options.
8. Use the F8 or Shift key in combination with F8
This method is usually used on Windows XP/7 operating systems, but on Windows 10, pressing the F8 key to enter Safe Mode is disabled.
– To re-enable the F8 key, you need to right-click on the Start menu and select Command Prompt (Admin) and then select Yes in the User Account Control dialog box.
– Next, copy the command line bcdedit /set {default} bootmenupolicy legacy into the Administrator: Command Prompt window and press Enter .
On Android phones
For Android smartphones or tablets running Android 6.0 or later, how to enable safe mode is as follows:
– Press and hold the Power button (power button).
– Click to select Power off .
– When the safe mode restart prompt appears, tap again or tap OK .
Your device will then reboot and show “safe mode” in the lower left corner.
Above is an article on how to enter safe mode on Android phones and windows 10 laptops. Good luck!
Thank you for reading this post What is Safe Mode? How to enter safe mode on Android phones and Windows 10 laptops at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: