What is Reverb? Reverb modes and some tips to use reverb effectively

Do you often use sound systems or amps but do not know what reverb is and what is it used for? Please refer to the article immediately to know what reverb is? The following reverb modes and some tips for using reverb effectively!

What is Reverb?

Reverb is understood as a reverberation effect of sound that often occurs in closed rooms. When in a large room, if you emit sound, it will reverberate and hit the surface of the room, reflecting continuously overlapping each other and eventually creating an echo called reverb.

Reverb depends a lot on spatial factors and materials present in that space. The larger the space such as a cave, hall, etc., the louder and clearer the echo will be in the living room or classroom. In addition, if there are hard materials in that space, there will be better reverberation and reflection in spaces with a lot of soft materials.

Uses of reverb in audio

Reverb is used a lot in the sound system of the hall or in the karaoke system to make the sound better, especially applied to handle karaoke microphones. In addition, reverb also creates a feeling for the listener to feel the sound more closely and emotionally.

On the other hand, reverb has a very important use to help connect different audio sources, if you try not to use reverb, you will hear an extremely boring song, the sound becomes disjointed because there is no difference. mount from reverb.

Modes of reverb

Room Mode – Room Mode

Room mode helps to reproduce a small space be it a bedroom, living room or recording studio, etc. The material is mainly concrete, wood with a smooth surface, so the echoes are very messy. You will feel the reverb emitted will not be clear. Therefore, it is necessary to place the speaker in an effective position to be able to overcome it.

Halls Reverb mode

In a large space, people often choose the Hall Reverb mode the most. Compared to Room, Halls create more reflected sound, when listening, it feels more comfortable and has more depth. However, the sound output will be distorted and sound superfluous when setting the non-standard Halls mode.

Chamber Reverb

Chamber mode was created in 1947 and is widely used in karaoke systems. Songs supported by this mode will feel deeper and less resonant. Chamber mode is most optimal when you choose the right karaoke speakers and microphones to capture the reflected sound along with the original sound in that room.

Plate Reverb

Plate is made from large, charged metal plates that vibrate according to the sound emitted by a transducer installed inside. The sound produced by this mode gives a fuller, more distinctive feel. Plate Reverb is suitable for use in medium sized karaoke rooms.

Spring Reverb

This mode was most widely used and developed in the 70s, producing a characteristic metallic sound. Spring has the same working mechanism as Plate but replaces charged metal plates with springs. Spring Reverb is often used in sound systems in large spaces such as factories.

Impulse Response

Impulse Response mode is specially reproduced in extremely large spaces such as caves, theaters,… After just a few simple steps, Impulse Response can process unpleasant noises into sounds. bring an extremely unique and refreshing opera sound to listeners.

Some tips to use reverb effectively

Set reverb – Send or Insert

The principle of operation of reverb on these two forms of Send and Insert is understood as follows:

• Send: does not change the original signal when acting on the sound.
• Insert: when acting on the sound will change the original signal directly.

That’s why the Send form is used the most in all cases because the reverb inherently plays the role of connecting single sound sources in a common space. In addition, the sound effects set to Send can affect many different sound sources at the same time.

Only use reverb when necessary

The use of reverb should also not be overused, in addition to creating a more vivid sound, in some cases reverb will make the sound you want to use become difficult to hear and uncomfortable. Therefore, you need to be careful when using this feature.

Select Room Mode and set accordingly

If you want to reproduce the space with perfect sound, then Room Mode is the most suitable option. On Reverb devices, there will be a series of Room Modes giving you many choices. Therefore, you should choose a Room Mode that suits your needs and set it up right for the intended use

Above is the information about what is reverb? Reverb modes and some tips to use reverb effectively. If you still have questions, please comment below for lassho.edu.vn to answer for you!