What is REC port, Phono port? How to use REC port and Phono port on amplifier

Amplifiers are indispensable devices in a quality sound system. However, to be able to connect to other audio devices, it is necessary to use ports such as REC, Phono. Let’s learn how to use these 2 ports with lassho.edu.vn!

Learn about the REC port on Amply

What is the REC port on the Amply?

The REC port stands for RECORD which means recording or recording. The REC port on the amplifier is a port that can connect other recording devices to help users conduct recording on demand.

Depending on the model, the position of the REC port is located in different positions and symbols. Besides, the REC port can be denoted as REC OUT, REC/L, REC/R,… and most REC ports are located in the Output port cluster.

Function of the REC . gate

The main function is to output a standard signal to a device that can be recorded . Some recording devices such as tape players, recording devices, etc. Most of these signal sources keep the output level signal intact. However, you can easily adjust the Equalizer depending on your requirements and preferences.

In addition, the REC port also possesses a number of other functions such as:

• Help the amplifier become a signal transfer station for other devices . In this case the signal of REC OUT must be maximal.
• Allows you to use signal transmission to another amplifier device if the line is being connected to other devices.
• Capable of high sound transmission and more stable than other equipment . In addition, the port is not affected by the Equalizer. Specifically, you increase or decrease the sound on the amplifier, the signals on the REC are not changed.

Instructions for using the REC port on Amply

The REC port on the amp has an extremely easy way to connect: First, prepare the white – red jack . Next, plug the end of the wire into the REC port , the other end you connect to the recording port.

If your amplifier device has a REC OUT port , so when you use it to listen to music you don’t need to use the receiver function, turn it off or switch to OFF mode. In addition, turning off the function also helps you to limit the back noise of the receiving device.

Learn about Phono port on Amply

What is Phono port on Amply? Source

Phono port on Amply is also known as Phono lane. This is an audio input signal of the Amp .

Other common Amply connectors use AV cables to connect the amplifier to an input device such as a disc player, recorder, or cassette, or when used as the desired connector. Now, this phono connector is used in a completely different device, the turntable .

The first vinyl record was made centuries ago and was very popular in the 1900s . Most families used this type of disc to play music at that time. For this reason, the first amplifiers with built-in phono connectors facilitate connection to turntables.

Then, with the advent of karaoke players and CD players, it was replaced by plastic discs, the phono connection gradually became obsolete. However, some customers are still using this type of vinyl, so most current amps still have this connection port.

Features of Phono . Gate

Some features of Phono gate you should know as:

• The Amply’s Phono input can only be used with turntables where the audio signal strength is very low . Therefore, if you are using a DVD player, the input disc may burn out the speakers or damage your electronic equipment.
• Amply’s Phono port contributes significantly to the sound quality of the music played on the player . This is because it is an intermediate connection port that helps transmit audio signals.
• In addition, in order for the audio signal to be transmitted safely and reliably, the built-in Phono port on the amplifier must be of high quality.
• The Phono port is capable of making the audio signal travel through a pre-amplifier stage before going into the amplifier and out to the speakers.

How to use Phono port on Amply

Using the Amply’s built-in Phono connector is pretty straightforward. Please follow the instructions below:

First, you need to prepare a cable to connect the phono amplifier connector to the output of the turntable. If your Amp is not directly supported, you will have to purchase a Phono box device . Two wires are required to connect the Amply to the intermediate device and then switch from the device to the coal end.

Please refer to some of the best-selling Amply models at lassho.edu.vn:

Above is an article about REC port, what is Phono port on Amply? Instructions for using the most standard REC port and Phono port. Hope this information will be useful to you and don’t forget to leave a comment below if you have any questions!