What is Panasonic air conditioner H16 error? Cause and remedy

Panasonic air conditioners are operating normally, suddenly stopped working and reported error H16, which makes many users feel confused. Don’t worry, let’s go through the article below with lassho.edu.vn to know the cause and how to fix the above error!

What is Panasonic air conditioner H16 error?

According to the Panasonic air conditioner error code announced by the manufacturer on the market, the H16 error is caused by the compressor load current being too low . However, it is difficult to determine the exact air conditioner with error H16 because the device has no display but only the Timer light flashes.

Cause of error H16 Panasonic air conditioner

Panasonic air conditioner H16 error can be caused by a number of reasons as follows:

• The main reason is that the compressor load current is too low.
• The problem of running out of gas, lack of gas on the air conditioner.
• Compressor malfunction or failure.
• Faulty hot board.
• The supply voltage to the air conditioner is weak.

Procedure to fix error H16 Panasonic air conditioner

Step 1: Check the refrigerant gas

First, you check the amount of gas of the air conditioner, it is possible that your air conditioner is short of gas or out of gas , causing the device to report an error H16.

To handle this error is quite simple, you just need to add more gas to the air conditioner . However, if you do not have a technical expertise, you should ask the support of a technician to fix the error for you!

Step 2: Check the compressor (air conditioner block)

In case, you have added or replaced gas but the device still shows an error, it is very likely that the compressor has a malfunction.

If the compressor is still working normally, the capacity is stable, but your air conditioner is missing cool air from the cold air of the device. Then replace the air conditioner with a new compressor block to make the machine work better.

Step 3: Check the power supply

If you often hear the air conditioner block sound louder than normal, then check and measure the voltage. If the display voltage is less than 200V , the cause of the H16 error is weak voltage.

To handle this error, you should first disconnect the power source from the device, then install a voltage stabilizer to help your air conditioner work in the best possible way.

Step 4: Check the heater board

If you have checked all of the above reasons and the air conditioner still cannot fix the H16 error, it is likely that the hot circuit board has a current transformer fault (open circuit). This causes the board to overload and the protection transformer to break.

To fix this problem is very difficult, so to be safe, you should contact the service and repair center for their help!

Above is information about the cause and how to fix the H16 error on Panasonic air conditioners that lassho.edu.vn sent to you. If you have any questions, please leave a comment below the article!