What is Multiband 6? Instructions on how to synchronize time with Multiband 6

Some watches today will have Multiband 6 function, but in Vietnam we cannot use this function, and many people still do not understand what this function is, let’s find out what Multiband 6 is. and simple ways to synchronize time with Multiband 6.

1. What is Multiband 6? On which watch?

Multiband 6 is a function that can receive radio signals to update the exact time. We can understand in a simpler way that the watch can locate and adjust the automatic update time according to radio waves.

Currently in the world there are 6 radio stations including Japan (2 stations), China, USA, UK, Germany. However, in Vietnam, there is still no broadcast station, so this feature cannot be used.

Multiband 6 is available on G-Shock, Climber Line watches (Climber Line PRW-50Y-1A, Climber Line PRW-50Y-1B, Climber Line PRW-60Y-2A, Climber Line PRW-60Y-1A, Climber Line PRW-7000X -first).

2. Instructions on how to synchronize time with Multiband 6

To sync the time, simply follow these steps:

– First you put your watch back to Tokyo time zone or in the remaining 5 cities with stations, you will be able to synchronize

– Press Mode to enter Received mode.

– Next, install JJY Simulator app on your phone (Android or IOS sync process is the same).

– Before entering the application, we go to the Settings section to set the Tokyo time zone for the phone.

– Then open the JJY application and we can use speakers or headphones:

• If using a speaker, place it near the clock
• If using a headset, plug the headset into the phone and place the headset around the watch so that the speaker is placed on the watch face .

– The screen will show RC Indicato , ie the sensor of the watch, we should let the speaker contact the sensor and wrap the headset wire or tape to fix it.

Next, press and hold the Forward button for a long time , then the watch begins to receive the signal, so we need to put the speaker close to the watch face (if there is noise around you, put the watch in a box to keep it safe). quiet).

– After the installation is complete, turn on the application again and press and hold the Forward button.

– When the screen appears a logo begins to receive waves, now you need to place the speaker close to the sensor part of the watch (put the watch in a quiet place).

– Then the watch will receive the part of the sound wave, this sound wave will have a frequency suitable for the clock and the watch can recognize it. The watch will automatically beep and update the time . The time will last about 3 to 4 minutes , the watch will update the time successfully.

– If the installation is successful, return to the main screen and reset the Bangkok time zone , the clock will run at the correct time.

Above is information about Multiband 6 and how to synchronize time with Multiband 6 that lassho.edu.vn shares with you. If you have any questions, please leave a comment below the article.