What is Brother Printer Drum Error? Causes and effective remedies

Printer is a device that brings many benefits to users. However, the printer can also encounter errors, one of which is the Drum error in the Brother printer. In this article, we will learn the cause and how to solve this error!

What is Drum Error on Brother Printer?

Printer Drum error usually occurs when the printer has a problem with the Drum unit and causes the printer to stop working. It is like a warning for users to clean the device regularly, avoid the cable getting dusty and should be replaced if the component has been used for a long time.

Drum errors on Brother printers can have many causes and indicate a variety of problems. However, this error is related to the ink transfer unit ( Drum Unit ) – one of the most important parts in the printer and responsible for transferring ink onto the printed paper.

In some cases, a Drum error can be corrected by replacing the ink transfer unit with a new one or checking printer-related equipment to identify and correct the error. However, this error may be related to a problem with the computer’s system or processor and needs to be resolved by repairing or updating the software.

Brother printer status Drum error very often occurs

Cause Brother printer error Drum

There are many factors that cause Drum errors in Brother printers, but the two most basic are:

• Damage to the drum caused by using the machine for a long time. In this case, replacing it with a new blank resolves the error.
• The high-voltage wire on the cartridge is torn or dirty due to dust accumulation. In this case, replacing or thoroughly cleaning the high-voltage wire will resolve the error.

You should check the printer’s high-voltage wire regularly

How to fix Brother printer error Drum

For Brother HL . series printers

• Step 1 : Disable the printer by turning off the power. Then, open the front panel of the device.
• Step 2 : Take out the toner cartridge, then put it back in its original position.
• Step 3 : Press and hold the Go button until all the lights on the printer are on (this should take about 5 seconds).
• Step 4 : Close the previous frame and wait for the Reset process to complete.

Fix Drum error on Brother HL . printer

For Brother MFC . printer series

• Step 1 : Turn off the printer and open the front cover.
• Step 2 : Click the Option key or the Clear key. On the LCD screen of the printer, the text ” Replace Drum ” will appear. Press 1 to perform the reset.
• Step 3 : Wait until the screen displays the word ” Accepted “.
• Step 4 : Close the front cover and wait for the reset process to complete.

Fix error on Brother MFC . printer series

For Brother DCP printer series

• Step 1 : Turn off the printer and open the front cover.
• Step 2 : Press the Option or Clear key to open the printer’s LCD screen, then press Up Arrow (+ sign) in the Replace Drum? to perform Reset .
• Step 3 : Wait until the screen displays the Accepted message.
• Step 4 : Close the front cover and wait for the Reset process to complete.

Fix Drum Error on Brother DCP Printer

Above is information about Brother printer Drum error handling. If you have any questions, you can leave a comment for support. In addition, follow lassho.edu.vn to update other useful information.