What is Aqua washing machine EA error and how to fix it quickly

Does your Aqua washing machine have a water level error that prevents the control board from receiving a signal to measure the water level to be flushed? Maybe the washing machine has made an EA error, let’s take a look at the article about what is Aqua washing machine EA error and how to fix it quickly!

What is Aqua washing machine EA error?

The EA error on the Aqua washing machine is related to the water level error . The water level sensor of the washing machine is damaged causing the rheostat to break, thereby making the control board unable to receive the signal from the water level sensor.

Causes and how to fix Aqua washing machine EA error

The water level sensor float is broken

Reason:

• The water level sensor float has the effect of considering the appropriate level of water to be flushed into the washing machine. Therefore, if the water level sensor float is damaged, the washing machine will not measure the amount of water to be rinsed and will report an EA error.

How to fix:

• Please contact a reputable washing machine repair or service center to check and replace the new pressure float.

Control circuit does not receive signal from water level sensor

Reason:

• The wire from the sensor float to the control circuit is broken due to the mouse bite or loose, making the control circuit not receive the signal from the water level sensor.

How to fix:

• Please check whether the conductive pins connected to the circuit to solder with the contact point are lost or the lines leading from the sensor float to the control circuit are broken or not. If so, please re-solder the contact points, connect the broken wires together !

Controller board is damaged

Reason:

• The control circuit is the part that handles the washing machine’s programs and maintains the washing machine’s operation. Therefore, if your Aqua washing machine reports an EA error, it is most likely because the control board has been damaged.

How to fix:

• Please reset the washing machine, delete all previously installed programs . If the washing machine no longer shows the EA error, you can use it as usual.
• If the machine still shows an error, please contact the warranty center or a reputable washing machine repair center to check and repair the correct error!

Above is an article about what is Aqua washing machine EA error and how to fix it quickly. If you still have any questions that need to be answered, please leave a comment below so that lassho.edu.vn can help you!