You are viewing the article What is Aqua washing machine E2 error and how to fix it quickly at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
Your Aqua washing machine is not draining, the screen shows E2 error continuously but you do not know the cause and how to fix it? Then check out the article about what is Aqua washing machine E2 error and how to fix it quickly!
What is error E2 Aqua washing machine?
When your Aqua washing machine encounters an error of draining the drum, the display will show an error E2.
Causes and ways to fix error E2 Aqua washing machine
Drain pipe is clogged
Reason:
- It is possible that in the process of washing, the washing machine’s drain pipe has slipped out of the body or is bent, clogged with dirt, moss or foreign objects causing blockage.
How to fix:
- Check the drain hose for kinks or slips. If so, remove the water line to straighten it .
- If the water pipe is blocked, use a stiff steel wire with a hook at the end to pull through and pull out the sticky residue in the pipe. After that, clean the pipe again!
The drain valve of the washing machine is blocked
Reason:
- The drain valve of the washing machine is clogged with dirt, moss or foreign objects.
How to fix:
- Check the drain valve to see if it is clogged. If yes, please use a hard steel wire to hook at the end to thread through the valve to pull out the clogged dirt and clean the drain valve.
Drain pump not working
Reason:
- Some Aqua front-load washing machines are often equipped with a drain pump to help the water drain out faster. So if your Aqua washing machine shows an E2 error, it is most likely that the drain pump is faulty or damaged!
How to fix:
- To fix this error, first use a screwdriver to open the two screws at the bottom of the washing machine and remove the washing machine cover.
- Next, use a multimeter to check if power is being supplied to the drain pump. If the impeller does not rotate, the discharge pump is damaged.
- When detecting a damaged drain pump, please contact a reputable washing machine repair center or service center to have it checked and replaced with a new drain pump!
Controller board is damaged
Reason:
- If, after you have fixed the above errors, the washing machine still shows E2 error, then the machine has damaged the control board.
How to fix:
- The control circuit is an important part with a rather complex structure. Therefore, if you want to fix the E2 error caused by the control board, you need to contact the warranty center or a reputable washing machine repair center to check and fix it in time!
Above is an article about what is Aqua washing machine E2 error and how to fix it quickly. If you still have any questions that need to be answered, please leave a comment below so that lassho.edu.vn can help you!
Thank you for reading this post What is Aqua washing machine E2 error and how to fix it quickly at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: