You are viewing the article Pocket 4 ways to effectively clean rust stains on bicycles at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
Rusty bicycles lose their shine and sometimes stain your clothes. Do not rush to find a car repair shop, but read the article below of lassho.edu.vn to immediately pocket 4 effective ways to clean rust stains on bicycles!
See more Bicycle lubricants are on SHOCKING discount
Use baking soda
Prepare:
- 3 tablespoons baking soda powder
- 3 tablespoons water
- 1 pcs brush (sponge)
- 1 pair of rubber gloves
Making:
Step 1: You mix the baking soda mixture into the water in the bowl in a ratio of 1: 1 until the dough becomes a paste.
Step 2: After you have the paste, you proceed to spread it on the rust spots on the car with a brush or sponge and let it sit for about 10-15 minutes .
Step 3: Use a sponge or you can use a plastic brush or steel wool to scrub the baking soda. While you’re scrubbing like this, you’ll see the rust slowly dissolve and peel off the car. If you don’t see the rust coming off, spread more baking soda on it and scrub a little harder to achieve the desired results!
Step 4: After you finish scrubbing, leave the baking soda mixture as it is for another 10-15 minutes and then wipe the mixture off with a dry microfiber cloth.
Use a mixture of lemon juice and baking soda
Prepare:
- 3 tablespoons baking soda powder
- 3 tablespoons water
- 1/2 lemon
- 1 pcs brush (sponge)
- 1 pair of rubber gloves
Making:
Step 1: After preparing all the ingredients, you proceed to mix the baking soda mixture into the water at a ratio of 1:1 until the dough is pasty. Then, add a few drops of lemon juice to the mixture, mix well.
Step 2: Then you have a paste. Apply the mixture to the rust on the car with a brush or sponge and let it sit for about 10-15 minutes .
Step 3: Next, you use a sponge, plastic brush or steel wool to scrub the baking soda mixture just mixed on the rust on the car, the rust will slowly melt and peel off the car.
Step 4: After the scrubbing is complete, keep the mixture you have just spread on the car for another 10-15 minutes , then use a dry microfiber cloth to wipe the mixture.
Use vinegar
Prepare:
- 100ml white vinegar
- 1 teaspoon baking soda powder
- 1 spray bottle
- 1 pcs brush (sponge)
- 1 pair of rubber gloves
Making:
Step 1: You pour a sufficient amount of white vinegar into a spray bottle, then add 1 teaspoon of baking soda to the mixture to increase the corrosion.
Step 2: Next, you proceed to spray the vinegar mixture on the rusted places on the bike.
Step 3: Leave the vinegar mixture on the car for 10-15 minutes and then use the faucet to rinse the bike after removing the rust.
Step 4: Dry the car beautifully before storing it with an alcohol-soaked rag.
Use rust remover
Prepare:
- 1 pair of rubber gloves
- 1 pair of safety glasses
- 1 rag
- Chemicals used to remove rust
Making:
Step 1: First, find a rust remover at a metal shop or a bike shop.
Step 2: Wear gloves and goggles before using this chemical because these chemicals have strong cleaning properties, which can be harmful to eyes and skin.
Step 3: After putting on goggles and gloves, start scrubbing the rust with the cleaner according to the instructions for use. The time it takes for the cleaner to sit on the rust layer is not fixed, depending on the product, but it is recommended to be from 30 minutes to 1 hour .
Step 4: After the waiting time is up according to the instructions for use, take a towel to wipe off the detergent.
Notes to protect the bike from rust, beautiful as new
To avoid rusting of bicycles affecting the aesthetics of the car, you need to note a few points as follows:
- After using your bike, clean it and store it indoors to avoid the effects of sunlight and rain, which can cause abrasion to the metal layers.
- Apply a special grease to metal parts on your bike to prevent rust.
- If your bike is partially rusted or damaged or deformed, replace the entire part of the bike.
- Car care and maintenance regularly to keep the car’s newness and prolong its life.
(Image source: wikihow.vn)
Thus, lassho.edu.vn has finished guiding you on 4 effective ways to clean rust stains on bicycles. Wish you have an interesting route when traveling by bike!
Thank you for reading this post Pocket 4 ways to effectively clean rust stains on bicycles at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: