Instructions on how to play Wi-Fi on a laptop without software

You want to use your laptop to broadcast Wi-Fi and share it with everyone but don’t know how to do it. So do not ignore the following article, lassho.edu.vn will guide you how to play Wi-Fi on your laptop without simple and detailed software.

See now the Wi-Fi Router is having a SHOCKING discount

Why should you play Wi-Fi on your computer?

When the Wi-Fi hotspot is far from your current location, you can use your laptop to broadcast Wi-Fi and share it with other nearby devices. In this case, the laptop allows up to 8 devices to connect at the same time, helping you not to be interrupted by work or entertainment.

How to play Wi-Fi on a laptop running Windows 7

How to play Wi-Fi on Windows 7

Step 1: You open the Network and Sharing Center window through the following 2 ways:

• Method 1: At the Start menu and in Control Panel , select Network and Sharing Center .

• Method 2: Left-click the Network icon on the Taskbar > Select Open Network and Sharing Center .

Step 2: In the Network and Sharing Center window, select Set up a new connection or network .

Step 3: Select Set up a wireless ad hoc (computer-to-computer) network > Select Next .

Step 4: Continue to select Next .

Step 5: Set important options > Select Next .

• Network name: The name of the Wi-Fi network you will broadcast.
• Security type: The security type of the Wi-Fi network to play, you should choose WPA2-Personal .
• Security key: The password of the Wi-Fi network to play.

Step 6: You wait a few seconds to complete the setup. Then, you can check the newly created Wi-Fi name by left-clicking the network icon on the Taskbar.

How to turn off Wi-Fi broadcasting on Windows 7

Step 1: Select the network icon on the Taskbar > Select Open network and sharing center .

Step 2: Select Manage Wireless Networks in the left pane of the screen.

Step 3: You select the Wi-Fi name you want to turn off > Select Remove .

How to play Wi-Fi on a laptop running Windows 10

Method 1: Play Wi-Fi on Windows 10 through Windows Settings

Step 1: Open Settings > Select Network & Internet .

Step 2: You select Mobile hotspot > Turn On > Select Wi-Fi to share Wi-Fi to others.

Step 3: Select Edit to change the Wi-Fi name and password (if desired).

Step 4: You enter the Wi-Fi name in the Network name section and enter the Wi-Fi password in the Network passwork section (at least 8 characters) > Select Save .

Method 2: Play Wi-Fi on Windows 10 via Command Prompt – run as administrator

Step 1: In the Start menu, search for Command Prompt – run as administrator .

Step 2: Type the following command:

For example, your access point name is DienmayXANH , password is KNHdienmayxanh . You will type the command:

netsh wlan set hostednetwork mode=allow ssid=DienmayXANH key=KNHdienmayxanh

Step 3: Type the next command: netsh wlan start hostednetwork to start the Windows 10 Wi-Fi hotspot.

Step 4: You open Settings , at the Status tab select Network and Sharing Center .

Step 5: Click Change adapter settings .

Step 6: Select the Wi-Fi in use > Right-click and select Properties .

Step 7: In the Properties window, switch to Sharing > Select Allow other network users to connect … > Select OK to start playing Wi-Fi on Windows 10.

Step 8: To turn off Wi-Fi, enter the command line: netsh wlan stop hostednetwork

Step 9: To cancel the created Wi-Fi network, enter the Command Prompt: netsh wlan set hostednetwork mode=disallow ssid= ten_wifi key= mat_khau

Above is how to play Wi-Fi without software on Windows 7 and Windows 10. Wish you success.