How to use Sunhouse hot and cold water plants properly and effectively

Sunhouse hot and cold water plants have elegant white tones and high quality to help provide adequate hot and cold water for families and companies to use. Let’s learn how to use Sunhouse hot and cold water plants to make the machine operate most efficiently and reliably through this article!

With products that apply block cooling technology, it takes about 2-3 hours before connecting to power

When just moving the hot and cold water plant, the gas inside the device is disturbed and affected. Therefore, if the machine is used immediately, the gas in the hot and cold water plant is prone to shock, reducing the life of the product.

In order for the machine to operate stably and stably and the water source to achieve optimal hot and cold efficiency, you should wait 2-3 hours before connecting the power and using the water plant as usual.

In particular, for Sunhouse hot and cold water plants equipped with Block technology, users should wait about 3-5 hours before starting and putting into use, so that the gas is stable.

Sunhouse SHD9546 hot and cold water plant has a modern Block cooling system

With products powered by microchips, plug it in right away, no need to wait

Besides, for Sunhouse hot and cold water plants that apply cooling technology with electronic chips, you can plug in and use immediately by putting the water bottle on the hot and cold water plant.

Can be plugged in immediately without waiting for hot and cold water plants powered by microchips

Place the machine in a cool place away from the wall about 10-20cm

So, in order for the device to work effectively and sustainably, users should place the device about 10-20cm away from the wall on a flat position . Moreover, you need to pay attention not to let the hot and cold water plants collide with each other, leading to damage and unsafety to use.

Please place the Sunhouse SHD9615 hot and cold water plant about 10-20cm away from the wall

Adjust the float of the pot properly with each type of water plant

Currently, Sunhouse hot and cold water plants are distributed on the market with many models. Therefore, you should also pay attention to choose a bottle with the appropriate design and capacity to avoid water overflow and damage to internal components.

In addition, when plugging the water tank on the machine, it is necessary to choose the right type of bottle used for the water plant. If using an upside-down bottle on the machine, the user must adjust the float of the upside-down bottle appropriately with each model of Sunhouse water plant.

For safe use, you should choose a dedicated water bottle or buy one specifically for hot and cold water plants. At the same time, you need to prioritize choosing a reputable and pure water source brand to ensure the health of family members.

Users need to adjust the float of the kettle to match the Sunhouse SHD9546 670W . hot and cold water plant

Plug in the power to run the machine only when you see water coming out of the two faucets

When placing the water supply tank for the machine, the user needs to press the two hot and cold side faucets to let the water flow out before plugging in the power. This action is to ensure that there is water in the kettle, thereby avoiding machine fire and component damage.

Particularly for the type of hot and cold water plants running on Block, you should wait at least 10 minutes (after moving) for the machine to stabilize before plugging in the power behind the machine.

You need to note that only plugging in the machine to run when you see water from the two hot and cold faucets flowing out to avoid the lack of water leading to a fire.

Disinfection time for the cavity (maximum 30 minutes)

For models with sterilization chamber and the clock symbol from 0 – 30 is the sterilization time for the cavity ( maximum is 30 minutes ). At the same time, before putting it into use for the first time, you should clean the water plant by opening both faucets for about 3-5 liters of water to clean the water pipes.

Sunhouse SHD9612 670W hot and cold water plant compartment needs to be disinfected for up to 30 minutes

Turn off the power switch when the water runs out

Turn off the power switch when the hot and cold water plant runs out of water and when changing the tank to ensure no electricity leakage, endangering users. Besides, when there is no water tank, you should also turn off the power switch to ensure safety and help prolong the life of the device.

In addition, users should also note turning off the power when not in use for a long time in case of being away for many days, going on a business trip or not needing to use water in hot or cold mode,… to avoid wasting resources. energy.

Please turn off the power switch when the water runs out to ensure no dangerous electric leakage

Periodic warranty on hot and cold water plants at a reputable warranty facility

During use, you should clean the device periodically every 1-2 weeks and regularly check and replace other parts if there is damage. This helps the water source to stay clean, and the hot and cold water plants will work more efficiently and safely for health.

When detecting a problem with the machine including: power flickering, electric leakage or the machine cannot produce hot and cold water, … please ask for the help of a service center like lassho.edu.vn (for customers). buy at lassho.edu.vn) to fix it quickly.

Clean and maintain Sunhouse SHD9615 hot and cold water plants periodically to ensure good water quality and increase equipment life

Sunhouse hot and cold water plants are being sold officially at lassho.edu.vn supermarket systems nationwide, you can buy directly at the store or order online through:

• Website: www.dienmayxanh.com/cay-nuoc-nong-tinh-sunhouse
• Purchase call center: 1800.1061 (Toll free) from 7:30 to 22:00 (both Sundays & public holidays).

(Warranty policy was updated on 06/2023, subject to change from time to time. You can see more updated information here.)

Hopefully the above article will help you understand more about how to use Sunhouse hot and cold water plants properly and effectively. Any questions please leave a comment below!