How to Skateboard

Learn how to stand on the skateboard properly. Put the board on the flat ground and stand on top to learn how to put your feet, and learn how to balance so you don’t fall. Place your feet horizontally on the skateboard, so that your feet are almost parallel to the axle that attaches the wheel to the skateboard.

• The dominant style is where you put your left foot in front and your right foot in the back. This means you will use your right foot to push the board forward.
• Left footing means you put your right foot in front and your left foot in the back. That means you will use your left foot to push.
• Push back and forth a few times to see how the wheels move and the skateboard shaft wobble. Get used to it and get comfortable.

Try pushing back and forth gently and placing both feet on the board. Rotate the front foot slightly to align with the skateboard, instead of leaning as at first. Use your other leg to gently push up. Go slow first, you don’t want to get in an accident just because you’re going too fast when you’re not ready.

• Once you’ve gained momentum, practice placing your back foot on the end of the skateboard, just in front of the curved tail, around the wheel hub. Balance and slide, remember to lower your knees a little for better balance.
• The mongo push means you’re more comfortable pushing the board with your front foot, and leaving your back foot on the board. This is acceptable to some people, but it will make it difficult for you later, and swinging the front foot back and forth when pushing the board also looks very clumsy. If you find yourself using this push-up, try switching back to a normal or left-footed stance.

Keep pushing the skateboard as you find yourself slowing down. Continue like this, creating light push-ups, and straightening your feet on the skateboard to move until it slows down. Then rotate your pivot foot sideways, push the board forward with the other foot, and then straighten the leg again. The more times you do this, the more proficient you will be at skateboarding.

• Try speeding it up, but only a little. Like riding a bicycle, some people find it easier to balance if they move a little faster.
• If you feel wobbly when moving, you can tighten the wheel shaft. This will make it harder for the skateboard to change direction, but you can easily practice until you control the wobble. Or leaning forward a little can also help you solve the problem.

Rotate the ankle and change the center of gravity to change direction. Once you know how to push the board and move, try changing direction a little while moving by changing the center of gravity of your body. Skateboarding and keeping your knees flexible, sit down to lower your center of gravity. Then lean forward a little to turn right (if you’re on a regular footing), and rotate your ankles to turn the skateboard to the left.

• Depending on how tight the wheel is, you will only need to lean back a bit or completely bend down. You can loosen the axles by turning the large bolt in the center of each axle (turn left to loosen, or right to tighten). This will make the pressure more (tighten) or less (unscrew), allowing you to switch direction harder (tighten) or easier (unscrew).
• If you lose your balance or fall when you change direction, tilt your upper body to the opposite side. The real problem is that your feet are the pivot point, so the axes will cause the skateboard to change direction.

Put your back foot on the ground to stop. To stop, simply put your back foot on the ground as you slow down, and slow down the momentum of the skateboard. However, you should not put your foot on the ground at high speed. Start by gliding your feet and gradually put stronger steps on the ground. Remember to put your foot on the skateboard to hold it or it will keep going.

• You can also lean back and kick your tail into the ground when you want to stop. Some longboards have a plastic “brake” attached to the bottom edge of the skateboard, while most do not. This type of stop will be a bit more difficult, and will scratch the tail end of the skateboard. An alternative way to prevent you from scratching the tail of the skateboard is to place your heel behind and your toes still on the skateboard, when you step down, your heel will land instead of the tail of the skateboard.

Try switching legs while skateboarding. Once you’re comfortable with skateboarding, try switching legs, with the dominant foot back and the non-dominant foot forward. If you want to be a good skater, you have to learn to skate with both feet, because later you need to switch legs to do technical movements. This will come in handy when you’re learning to skate on a slide, or do a lot of other skateboarding techniques.

Learn to fall properly. All skaters have fallen frequently since the beginning of their practice. It’s part of skateboarding. It’s important to wear the right protective gear while skateboarding, and learning how to fall properly is also important. To help you avoid serious injuries instead of the usual scratches and bruises, you should learn some tips to keep yourself safe.

• Reach out your hand, but relax. If you keep your hands rigid, you run the risk of more serious wrist and ankle sprains if you use them to support a fall. ^[3]
• Roll out as soon as you fall. You may get a little scratch, but it will hurt less when you put your hand on the ground.
• Jump out if you feel something is wrong. If you’re sliding too fast and can’t control the skateboard, jump off the board and land on your feet, or roll onto the grass. Do not stand on the board when you have lost control.

Watch experienced skaters to learn more techniques and tips. Find newbies to skate with. This helps you learn their style or skills at different levels. If you don’t know anyone, ask the skaters near you. They are usually friendly people, and will help you out. Do whatever you want, experiment, take a higher jump, learn to do new techniques. Your instructor will now be more of a friend than a teacher, sharing skills with that person, and anyone you want to show them off.

• For more tips on how to do the moves, you can always watch the moves in the video in slow motion and pay attention to the leg movements. Continuous images are also a good way to learn.
• The more you practice, the better you get. Don’t get discouraged just because you can’t do a movement the first few times you try. Keep practicing and having fun with your friends, and someday you’ll be able to do it.

Start with bouncing up the front of the skateboard by stomping your back foot on the tail. A jump involves bouncing the skateboard up and down safely. The first part of this technique is getting used to stomping your back foot on the tail of the skateboard so it hits the ground, so you can make the skateboard jump. Get used to this move, because practice is never enough.

• As you stand on the board, practice swinging back and forth, bouncing the top of the board up and back to the original position. You can also try this while skating if you’re brave enough.
• Before you do jumping jacks, you should stand next to the board and practice bouncing it up. Use your foot to press on the bottom of the skateboard to see how much force is needed to bounce the head up high. This also comes in handy if you want to stomp on the top of the skateboard so it’s easy to hold in your hand.

Try bouncing the board up while you’re standing still. Stand on the skateboard and bend your knees slightly, shift your weight onto the rear wheelbase, and step back a little so your feet rest on the tail. Step the tail down, just like you would to stop the skateboard, but don’t touch the ground. Then turn the board up high.

• Don’t try this move on the move right from the start. If you are not familiar with the movement of bouncing the board up while standing still, when you try to do this move while moving, it will be very dangerous, you can be bounced off the skateboard and “measure the way”.

Turn the skateboard up high and jump. To make the skateboard pop, you need to simultaneously step back your front foot slightly and lift it up, so that your knees are almost touching your chest, while your back foot is down on the tail.

• This move needs to be done at a fast pace, and it is also quite difficult to do in the beginning. You need to jump high to get off the skateboard at the same time you pop the skateboard up with your back foot. ^[4]
• You will lift the front leg a little before lifting the back leg. Imagine you are running on the sidewalk and jumping over an obstacle. You will need to do something like that.

Bring your feet forward to catch the skateboard. After the skateboard bounces high, bring your foot forward to push the skateboard back and control it. You need to do so as soon as you jump high.

Push the skateboard back to the ground by straightening your legs. After you’ve pushed the skateboard horizontally, bring it down into contact with the ground by straightening your legs and lowering the skateboard to the starting position. The most important thing to remember when descending is to step on the place where the skateboard is attached to the wheel hubs and bend your knees, to increase your chances of continuing to move and to help prevent the skateboard from breaking later, as well as to avoid crashing. love.

• There’s no shame in jumping off the board. If the skateboard is out of balance or just feels like something is wrong, don’t try to land on it, land on the ground instead.
• In fact, it’s better to practice your first jumps by jumping off the skateboard as it bounces and then landing next to it.

Try jumping on the go. Once you’ve mastered the skill of jumping while standing still, try doing it while moving. Push the board and start sliding at a slow to fast pace, then sit down and turn on the board while you’re still skating.

• This is a basic skill to learn, because most other dance techniques rely on it. For more information on those special techniques, see the next section.

Try the aerial swing. Make a jump as high as you can, as soon as you take your foot off the board, knock the board with your front foot so that it rotates 180 degrees. You’ll probably need a little more “swing force” from your rear foot to make it rotate easier.

Try flip rock. Do the same as swinging the board in the air, except by knocking on the board, you will kick the edge of the board causing it to rotate along the direction of the skateboard. Try a few different moves until you get it to rotate. This is not a simple technique, so you need to practice a lot and don’t give up.

Try sliding on the railing. Start with low railings (equal to or less than 30 cm). This technique is not easy either, so follow it step by step.

• Start by sliding close to the railing, then jump off the board and land on the railing with your feet, letting the skateboard run away.
• Next, practice turning on the skateboard at the same time as jumping but don’t care where the skateboard will run, just make sure you can get your feet on the railing.
• Make sure you slide to the railing at a tight angle rather than in line with the railing. As a result, there is less chance of the wheel hub getting caught on the railing.
• Then let’s start doing it for real. Jump as high as you can, in the direction of the railing. Land with your feet on the wheel hub and the board balanced on the railing.
• If the skateboard slides sideways on the railing, it’s a “skateboard” style. If the skateboard forms a slight angle to the railing and the wheels get caught in it, it’s a 50-50 slide.
• Once you’ve reached the end of the railing, if you’re doing a “skate-board” turn the board straight out (so it stays on track) and land. If you’re doing a 50-50 slide, lift the front wheel slightly (by stepping lightly on the tail) so that the top of the board doesn’t hit the ground. Another way is to jump down.

Go to the training ground and learn how to slide in the slide. This technique takes a lot of determination, but it is well worth the effort.

• Start by placing the tail of the skateboard on the edge of the slide (the metal part at the edge of the chute), and the rear foot stands right behind the wheel hub, but far enough away for balance.
• Place your front foot on the front wheel hub, and lean over to skate down. Don’t hesitate, or you will fall. This takes confidence and strength.
• Make sure you lean forward when doing this move. Otherwise, the skateboard will slide off your feet. Your shoulders should always be parallel to the skateboard.
• Don’t worry about falling once you reach the other end of the chute, just jump off the skateboard when you reach the top.