You are viewing the article How to Record Voice on Windows PC at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 15,548 times.
With Microsoft’s Sound Recorder application built into Windows versions, you can record, edit, and listen to your voice again. The application allows to join phrases together, add background music or insert comments into documents or videos. The following article will show you how!
Steps
Using Sound Recorder
- On Windows 8, type “sound recorder” on the Start screen and select Sound Recorder in the list of results.
- Sound Recorder will not start if you do not have a microphone connected to your computer.
- To listen to audio again, you must have speakers or headphones installed on your computer.
- You can record 60 seconds with Sound Recorder. If you want a longer recording, see the next section or Tips.
- If you’re not ready to save, click Cancel to close the Save As dialog box. Click the Resume Recording button to add the recording. When finished, click the Stop Recording button and save the file.
- You can play back the Sound Recorder file on most Windows Media Player, iTunes or other similar applications.
Using middleware
- Most recording programs allow you to record longer than Sound Recorder’s 1-minute limit.
Advice
- To re-record a song from a CD player on your computer, set the computer to recognize the input line instead of the input mic as follows:
- Open the Sound panel by clicking the Start button > Contrp Panel . In the search box, type sound then click select.
- Click on the Recording tab.
- Click Line In > Set Default .
- Click on Properties > Levels tab and move the volume slider to the right to increase the recording volume, then click OK .
- In the Sound dialog box, select OK .
- Now you can get started!
- If you can’t find Sound Recorder on your computer, you may have deleted the program (to free up hard drive space). In this case, you can download another free recording program from a trusted website.
- To record guitar, you need a sound card with line input. Look at the front, back or side of the computer and you will see a spot with 3 holes in pink, blue and green. The pink hole is where the microphone is plugged in. Blue is the location of the line plug like a CD player, blue is an audio output device such as a speaker or headset. If only the guitar is plugged in, follow these steps:
- Plug one end of the guitar string into the guitar, the other end into the 1/4-inch (6mm) to 3/8-inch (9.5mm) adapter, then plug the string/adapter into the Mic input port. . So it’s done!
- However, if you want good sound quality, you should consider the USB interface, or some other active interface (requires power supply) between the guitar and the computer.
- The USB mic and audio interface is an efficient way to capture audio in and out of your computer. USB microphones sound great too.
- To increase the recording time on Sound Recorder beyond the 60-second limit, you can apply a few of the following tips. The first way is through bruteforce – cut and paste.
- Record 60 seconds of silence. From the Edit menu, choose Copy > Paste . Here’s how to double the recording time to 120 seconds. From here, you can continue pasting 60 seconds at a time, or double it up: for each paste, simply select Copy then paste. This will extend the recording time quickly: 60+60=120 + 120 = 240 + 240 = 480 + 480 = 960, etc. With just 4 copy-paste operations, you can record audio up to 16 minutes!
- The second way has a lower brute-force rate.
- Open Command Prompt by clicking Start . In the search dialog, type command prompt , in the list of results click on Command Prompt .
- In the command prompt, type the following command, where filename represents the filename you want to record, filetype is the file format:
SoundRecorder/FILE filename.filetype /DURATION hhh:mm:ss
For example, if you want to record the file “FunkyBunky” in wma format with a length of 3 minutes and 20 seconds, you can type the command
SoundRecorder/FILE Funky Bunky.wma/DURATION 0000:03:20
- Press enter key, Sound Recorder will start up as an icon in the notification area.
- Proceed to record, and at the end of the specified time, Sound Recorder will save the file with the name “FunkyBunky” at location C:UsersBunky
Things you need
- Input device—microphone, musical instrument, or media player. Most modern computers have a built-in microphone, but many still don’t.
- Output device—speakers or headphones.
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 15,548 times.
With Microsoft’s Sound Recorder application built into Windows versions, you can record, edit, and listen to your voice again. The application allows to join phrases together, add background music or insert comments into documents or videos. The following article will show you how!
Thank you for reading this post How to Record Voice on Windows PC at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: