How to Manually Adjust Voice with Audacity

• Users cannot download GSnap for Mac computers separately, which is why you must download the entire VST extension here.

• You can also click File and click Copy in the menu that appears.

• If you don’t see Go at the top of your Mac screen, click the desktop or open a new Finder window.

• You can also click File , and then click Paste Item in the pop-up menu.

• On a Mac, the Effects menu is at the top of the screen.

• You may have to drag the scroll bar up to find this option.

• If you don’t see GSnap here, you probably have a 64-bit version of GSnap installed on your Windows computer. You must delete the GSnap file in the “Plug-Ins” folder of Audacity and reload the 32-bit version of GSnap.

• If you haven’t recorded your voice yet, you’ll need to record it before continuing. This includes attaching a USB-type microphone to the computer.

• You can select everything in Audacity by pressing Ctrl + A .

• You’ll have to drag the scroll bar below the menu to find the GSnap… option.

• MIN FREQ (Minimum Frequency) : 80 hz
• MAX FREQ (Maximum Frequency) : 2000 hz
• GATE (Gateway) : -40 db
• SPEED (Speed) : Between 1 (broken tone) and 10 (smooth tone)
• THRESHOLD (Threshold where all lower signals are filtered out) : 100 cents
• AMOUNT (Adjustable Level) : 100%
• ATTACK (Time to fully open the gate after the audio signal crosses the threshold) : 1 ms
• RELEASE (Time to fully close the gate after the signal is lower than the threshold) : 61 ms

{“smallUrl”:”https://www.wikihow.com/images_en/2/22/Android7play.png”,”bigUrl”:”https://www.wikihow.com/images/thumb/2/22/ Android7play.png/30px-android7play.png”,”smallWidth”:460,”smallHeight”:460,”bigWidth”:30,”bigHeight”:30,”licensing”:”<div class=”mw-parser-output” “></div>”}

green in the lower left corner of the window, then listen to the audio again.

• AMOUNT – Gives 100% results with the highest level of equalization, so reduce this value if the tuning effect is too obvious.
• SPEED – Low speed will give a broken sound, like the voice of singer T-Pain, while higher parameters will give a smoother sound.
• You can also delete sharps and flats by clicking the green circles on the black key on the left side of the window.

• The larger the “ATTACK” and “RELEASE” parameters, the more natural the voice will be.
• Adding vibrato can make voices sound more natural.
• The lower the “THRESHOLD” value, the more robot-like your voice will sound.
• If the recording is out of tune, the equalization effect will be very obvious.