You are viewing the article How to Make Pinwheel at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
X
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
There are 7 references cited in this article that you can view at the bottom of the page.
This article has been viewed 6,819 times.
Pinwheels are fun decorations and fun toys for children of all ages. You can use the pinwheel to decorate your yard for parties or watch the kids revel in the vibrant colors whirling around. Once you know how to make a basic pinwheel, you can make more stylish pinwheels with more wings. You can also make propellers with disc-shaped wings. It doesn’t shoot, but it looks lovely as a decoration.
Steps
Make pinwheel simple
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/3/3b/Make-a-Pinwheel-Step-1-Version-5.jpg/v4-460px-Make-a-Pinwheel- Step-1-Version-5.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/3/3b/Make-a-Pinwheel-Step-1-Version-5.jpg/ v4-728px-Make-a-Pinwheel-Step-1-Version-5.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:” <div class=”mw-parser-output”></div>”}
Start with a square sheet of paper. You can use paper of any size, but about 15 cm is the best. [1] X Research Source Choose colorful paper; Two-sided printed paper with themed textures is best because both sides of it are patterned.
Draw 4 diagonal lines from the corners of the square to the center of the paper. Place the ruler on the paper connecting the upper left corner to the lower right corner. Draw a neat line following the ruler. Repeat this step from the top right corner to the bottom left corner. [2] X Research Source
- You can also fold the paper diagonally twice to create an X-shaped fold . [3] X Research Source
Cut each line to the middle. Stop cutting when about 1cm – 2.5cm from the center of the paper. Don’t cut all the way to the center of the paper; otherwise your pinwheel will come loose.
Stitch the alternating corners to the center. Each corner of the paper is now cut into two small corners. You will stitch each alternate corner into the center of the paper. Make sure all the paper corners overlap in the center. [4] X Research Sources
- Don’t fold the paper. You have to let the pieces of paper bend.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/8/84/Make-a-Pinwheel-Step-5-Version-5.jpg/v4-460px-Make-a-Pinwheel- Step-5-Version-5.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/8/84/Make-a-Pinwheel-Step-5-Version-5.jpg/ v4-728px-Make-a-Pinwheel-Step-5-Version-5.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:” <div class=”mw-parser-output”></div>”}
Thread the pin through the center of the paper. Remember to pierce all 4 corners and the pin should be in the center of the paper. Rotate the pin to widen the opening. [5] X Research Sources
Attach a few small beads to the top of the pin. You will only need 1-3 beads. Remember that the beads should be the same shape and size. The beads will help lift the pinwheel away from the pinwheel and spin it.
- Avoid using plastic beads for jewelry because they are too big.
Punch a hole in the pinwheel. Use a pin to punch a hole about 1.5 cm below the end of the stick. [6] X Research Source Press the pin into the wooden stick to stick, then tap lightly with a hammer. Pull out the pin once the hole has been punched.
- You can soak the wooden stick in warm water for a few minutes before punching the hole to prevent cracking.
Insert the pinwheel into the wooden stick. If the socket is too loose, pull out the pinwheel and put a drop of glue in the socket, then plug it back in. Test the pinwheel and pull the pin away if necessary. If the sharp end of the pin sticks out behind the stick, you need to use pliers to break it down.
Make stylish pinwheels
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/5/54/Make-a-Pinwheel-Step-9-Version-5.jpg/v4-460px-Make-a-Pinwheel- Step-9-Version-5.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/5/54/Make-a-Pinwheel-Step-9-Version-5.jpg/ v4-728px-Make-a-Pinwheel-Step-9-Version-5.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:” <div class=”mw-parser-output”></div>”}
Cut the paper into hexagons. Draw or print a hexagon on paper that you will use as a pinwheel. Cut the hexagon with scissors or a sharp metal ruler. [7] X Research Sources
- Textured paper is great for this, especially those with textures on both sides.
Draw lines connecting the corners so that they meet in the center of the hexagon. Use a ruler and pencil to draw lines connecting the opposite corners of the hexagon. When you’re done, you’ll have an asterisk (*) in the middle. [8] X Research Sources
Cut a section along the lines. Stop cutting when you are about 1/3 of the line length from the center of the hexagon. Don’t cut all the way to the midpoint, or your pinwheel will come off. [9] X Research Source
Concatenate all alternating angles to the midpoint. Starting at the top, convolution alternate corners to the center in a circle until you return to the starting point. Make sure that the paper corners overlap at the center of the pinwheel. Do not rub the paper folds, the propeller blades must bend gracefully! [10] X Research Source
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/9/93/Make-a-Pinwheel-Step-13-Version-5.jpg/v4-460px-Make-a-Pinwheel- Step-13-Version-5.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/9/93/Make-a-Pinwheel-Step-13-Version-5.jpg/ v4-728px-Make-a-Pinwheel-Step-13-Version-5.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:” <div class=”mw-parser-output”></div>”}
Push a board pin through the center of the pinwheel. Make sure you pin all the merged corners to the center. Push the pointed end of the pin through the back of the pin. Move the pin to widen the hole.
Attach a few beads to the tip of the pin. You only need 1-3 beads is enough. These beads will lift the pin away from the pin and help it spin. Do not use beads for jewelry.
Punch a pinhole in the top of the wooden stick. Use a pin to punch a hole about 1.5 cm below the tip of the stick. If necessary, you can use a hammer to knock the pin into the wooden stick, then pull the nail out.
Insert the pinwheel into the wooden stick. Spin the pinwheel. If it gets stuck, pull the stapler a little further away. If the sharp end of the pin sticks out behind the stick, you can use a hammer or pliers to break it down. If the pin is too loose, pull it out, put some glue in the hole, and put it back in.
Make a decorative pinwheel
Cut a patterned craft paper into 4 pieces of paper. Take a square sheet of paper with sides 30 cm. Using a metal ruler and craft knife cut the paper into 4 pieces 7.5 cm wide. [11] X Research Source
- Some craft papers have a white stripe along the bottom edge of the paper for labeling and pricing. You should cut this part off before cutting the paper into 4 pieces.
- This type of pinwheel is used to decorate gift boxes, on walls or as decorations. They don’t spin like regular pinwheels.
Fold the pieces of paper horizontally like a fan. Take the first piece of paper and fold the short side into a length of about 1.5 – 2.5 cm. Follow this fold to fold the rest of the paper in a fan-fold fashion. Fold in the same way with the remaining 3 pieces of paper. [12] X Research Source
Consider making a slight twist on one end of the folded stack of papers. Fold the piece of paper so that it looks like a closed paper fan. Cut one end of the stack of paper diagonally. Cut the stacks of paper one at a time, because its thickness makes it difficult to cut neatly. [13] X Research Source
- You do not have to do this step. This is just a decorative step for the pinwheel.
Glue the pieces of paper together to form a longer strip of paper. Glue a piece of double-sided tape to one end of a strip of paper. Place the end of the other strip of paper against it and press the two strips together. Keep doing this until you have glued in a long strip of paper. [14] X Research Source
- If both ends of the strips of paper are folded in opposite directions, they will form a V-shape when glued together. Trim one end so that the folded pieces are in the same direction.
Glue the paper strip into a circle. Apply glue or double-sided tape to one end of a strip of paper, pull the ends together, and press them together. [15] X Research Source
Fold the paper ring into a disc shape. If the pinwheel doesn’t lie flat, you’ll have to glue the back of it to keep it in place. Flip the pinwheel so the back side is facing up. Choose a wooden stick, straw, or bamboo skewers the same height as the pinwheel. Use hot glue to glue the stick to the center of the pinwheel, along the groove of the two pieces of paper. [16] X Research Source
Decorate the front of the pinwheel. To embellish the pinwheel, you can cut a small circle of the same type of paper and stick it on the front of the pinwheel to cover the hole. [17] X Research Source If you want the pinwheel to have a more rustic look, you can stick a large button on it.
Cut a cardboard circle to stick on the back of the propeller. This circle will make it easier for you to attach the pinwheel to the wall, to gift boxes or other objects. It’s fine if it’s the same color as the pinwheel, but it’s okay to use a different color. [18] X Research Sources
- Use a cup, jar, or bottle cap to draw a circle.
Use double-sided tape to stick the pinwheel. Glue a few pieces of double-sided tape to the back of the pinwheel, just above the circular piece of cardboard, then glue the pinwheel to the ribbon of the gift box you want to decorate.
- If you want to stick the pinwheel on the wall, try using double-sided foam tape.
- Try attaching multiple pinwheels together to make a long ribbon.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/a/a6/Make-a-Pinwheel-Step-26-Version-2.jpg/v4-460px-Make-a-Pinwheel- Step-26-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/a/a6/Make-a-Pinwheel-Step-26-Version-2.jpg/ v4-728px-Make-a-Pinwheel-Step-26-Version-2.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:” <div class=”mw-parser-output”></div>”}
Complete.
Advice
- Make the pinwheel out of thin plastic sheets such as acetate or file pagination.
- You can further beautify the pinwheel by painting the pinwheel with acrylic paint or spray paint first. Wait for it to dry and then attach the pinwheel.
- Wrap a pretty ribbon in a spiral around the wooden stick before attaching the pinwheel.
- You can use a straw instead of a wooden stick. The straw is not as durable, but it will be easier to attach.
- Attach beads, buttons or decorative beads to the top of the pin on the front of the pin for a beautiful look.
- Glue the reverse side of the two craft paper together for a double-sided craft paper. [19] X Research Source
- Use a rubber stamp to decorate paper that has only one solid color. [20] X Research Sources
- You can make the pinwheel simpler by attaching the pinwheel to the eraser at the end of the pencil. [21] X Research Source
Things you need
Make pinwheel simple
- Color paper
- Pencil
- Ruler
- Drag
- Board Pins
- Small beads
- pushpins
- Hammer (if needed)
- Short, thin wooden stick
Make stylish pinwheels
- Color paper
- Pencil
- Ruler
- Drag
- Board Pins
- Small beads
- pushpins
- Hammer (if needed)
- Short, thin wooden stick
Make a decorative pinwheel
- Color paper
- Pencil
- Ruler
- Drag
- Two-sided tape
- Hot glue gun and hot glue stick
- Stapling Tools
- Piece of cardboard or button
X
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
There are 7 references cited in this article that you can see at the bottom of the page.
This article has been viewed 6,819 times.
Pinwheels are fun decorations and fun toys for children of all ages. You can use the pinwheel to decorate your yard for parties or watch the kids revel in the vibrant colors whirling around. Once you know how to make a basic pinwheel, you can make more stylish pinwheels with more wings. You can also make propellers with disc-shaped wings. It doesn’t shoot, but it looks lovely as a decoration.
Thank you for reading this post How to Make Pinwheel at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: