How to Make an Electromagnet

The principle of operation of an electromagnet is: an electric current flows through a piece of metal and creates a magnetic field. To make a simple electromagnet, you need a power source, a conductor, and a metal. Wrap insulated copper wire around an iron screw or nail before connecting the copper wire to the battery, and watch the magnet attract metal objects. Remember that you are generating electricity so be careful when working with electromagnets to avoid electric shock.

Table of Contents

Wrap the wire around the piece of iron

{“smallUrl”:”https://www.wikihow.com/images_en/thumb/4/45/Make-an-Electromagnet-Step-1-Version-3.jpg/v4-460px-Make-an-Electromagnet- Step-1-Version-3.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/4/45/Make-an-Electromagnet-Step-1-Version-3.jpg/ v4-728px-Make-an-Electromagnet-Step-1-Version-3.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:” <div class=”mw-parser-output”></div>”}

Choose an iron nail or screw to make the main part of the magnet. Find a piece of iron somewhere in the house like a nail, screw, or bolt. Choose a piece of iron about 8-15cm long to have plenty of space to wrap the copper wire around it. ^{[1] X Research Source}

{“smallUrl”:”https://www.wikihow.com/images_en/thumb/4/47/Make-an-Electromagnet-Step-2-Version-3.jpg/v4-460px-Make-an-Electromagnet- Step-2-Version-3.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/4/47/Make-an-Electromagnet-Step-2-Version-3.jpg/ v4-728px-Make-an-Electromagnet-Step-2-Version-3.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:” <div class=”mw-parser-output”></div>”}

Pull a piece of copper wire. Since you don’t know the exact length to use until the piece of iron is wrapped, drill cut the wire from the coil. Position the rope perpendicular to the axis of the piece of iron so that you can wrap it many times with ease.

Leave a piece of about 5-8cm at the end of the copper wire. Before starting to wrap, leave a piece of unwound copper wire about 5-8cm long to connect to the battery. ^{[2] X Research Source}

Position the wire so that it is perpendicular to the iron plate axis.

Wrap insulated copper wire around the iron in one direction. Wrap a spiral around the iron to make a wire. Wind the wire continuously in one direction to create a strong current. ^{[3] X Research Sources}

It is essential that the wire flows in one direction so that the current also flows in the same direction. If you wind the wire in different directions, the current will also flow in different directions, and the electricity will not create a magnetic field.

Push the loops together while wrapping. Wrap the wire tightly around the iron, forming many spirals for the strongest current. While wrapping, use your fingers to push the loops together. Continue to wrap and push the wire together until the end of the iron. ^{[4] X Research Sources}

The more wires you use, the stronger the current, so you need to be careful when creating an electromagnet.

{“smallUrl”:”https://www.wikihow.com/images_en/thumb/4/49/Make-an-Electromagnet-Step-6-Version-3.jpg/v4-460px-Make-an-Electromagnet- Step-6-Version-3.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/4/49/Make-an-Electromagnet-Step-6-Version-3.jpg/ v4-728px-Make-an-Electromagnet-Step-6-Version-3.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:” <div class=”mw-parser-output”></div>”}

Wrap the entire nail in copper wire. There is no requirement for the number of turns of wire to wrap, you just need to wrap the nail all the way, and remember to push the loops together.

Cut the wire and leave a 5-8cm stretch. After winding to the end of the iron, use scissors or pliers to cut the wire from the coil. Cut the second end of this wire as long as the first, so that the two ends of the wire connect to the battery in a balanced way. ^{[5] X Research Sources}

Shave off the insulation at the ends

Scrape off a piece of insulation about 1-2cm long at the ends of the wire. Use scissors, sandpaper or a razor to remove the insulation at each end of the wire. This helps to conduct electricity better. ^{[6] X Research Source}

After the insulation is removed, the wire will change from the copper color of the insulation to the natural silver color of the wire.

Twist the ends of the rope to form a small circle. Use your fingers to bend the end of the wire into a small circle with a diameter of about 0.5cm. These two circles will touch the center of the two ends of the battery. ^{[7] X Research Sources}

Wrapping the wire in a circle will help the battery and the lead make good contact with each other.

Connect two leads to each end of a size D battery. Find a size D or 1.5 volt battery, and connect each end to one end of the battery. Apply duct tape or electrical tape to each end of the wire to keep it in place. ^{[8] X Research Sources}

Attach one end of the wire to the negative terminal of the battery, the other end to the positive terminal.

Test the magnet while holding the two ends of the wire connected to the battery. Once you’ve secured the battery with the power cord, try the magnets! Hold the battery with the iron close to a small metal object, such as a paper clip or a pin. If the nail, screw or bolt attracts the metal object, the magnet is working. ^{[9] X Research Source}

If the battery becomes hot, line it with a cloth to keep the battery and the wire in contact.
When you are done with the experiment, separate the two ends of the wire from the battery.

Increase the attraction of the magnet

{“smallUrl”:”https://www.wikihow.com/images_en/thumb/7/71/Make-an-Electromagnet-Step-12-Version-3.jpg/v4-460px-Make-an-Electromagnet- Step-12-Version-3.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/7/71/Make-an-Electromagnet-Step-12-Version-3.jpg/ v4-728px-Make-an-Electromagnet-Step-12-Version-3.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:” <div class=”mw-parser-output”></div>”}

Use battery packs instead of individual batteries for more current. The battery pack can provide power for longer and generate more current than the individual battery. They are sold at hardware stores and battery stores, and are used as normal batteries. ^{[10] X Research Source}

Do a little research before choosing a large battery pack to make sure your experiment stays safe.
The two ends will be attached to the positive and negative terminals of the battery pack, and you can use tape to connect.

{“smallUrl”:”https://www.wikihow.com/images_en/thumb/8/80/Make-an-Electromagnet-Step-13-Version-3.jpg/v4-460px-Make-an-Electromagnet- Step-13-Version-3.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/8/80/Make-an-Electromagnet-Step-13-Version-3.jpg/ v4-728px-Make-an-Electromagnet-Step-13-Version-3.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:” <div class=”mw-parser-output”></div>”}

Find a larger piece of metal to create a stronger magnetic field. Instead of a nail, use a metal rod about 30cm long and 1cm in diameter. Remember to use that metal rod with a battery pack to make a stronger magnet. You will have to use a lot more copper wire to wrap the metal rod. ^{[11] X Research Source}

Wrap the copper wire tightly around the metal rod for good current transmission.
If using a larger metal rod, simply wrap a piece of the metal rod to secure it.
Use electrical tape to connect the two ends of the wire to each end of the battery.

{“smallUrl”:”https://www.wikihow.com/images_en/thumb/5/53/Make-an-Electromagnet-Step-14-Version-3.jpg/v4-460px-Make-an-Electromagnet- Step-14-Version-3.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/5/53/Make-an-Electromagnet-Step-14-Version-3.jpg/ v4-728px-Make-an-Electromagnet-Step-14-Version-3.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:” <div class=”mw-parser-output”></div>”}

Wrap more loops for a stronger magnet. The more turns you wind, the stronger the current. Buy a large coil of copper wire and wrap as many turns as possible around the nail or screw to create a strong magnet, add as many overlaps as you like. ^{[12] X Research Source}

Use a small piece of iron for this experiment, like a nail, screw or bolt.
Wrap the copper wire around the iron piece in one direction.
Use cloth tape or electrical tape to glue the two ends of the wire to the two ends of the battery.

Warning

Never use high voltage current as you may get an electric shock.
Do not try to insert the end of the cord into an electrical outlet. High voltage current will flow through the wire and create a very strong current, which can give you an electric shock.

Things you need

Iron bolts, screws or nails
Copper wire with insulation
EASY size battery
Cutting pliers
Sandpaper or razor
Metal objects (tapes, paper clips, etc.)
Battery pack (optional)
Large metal pad (optional)

Steps

Wrap the wire around the piece of iron

Shave off the insulation at the ends

Increase the attraction of the magnet

Warning

Things you need

Related Posts