You are viewing the article How to Identify Real Gold at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Jerry Ehrenwald. IGI President, Jerry Ehrenwald, is a New York-based gemologist who has spent his life in the industry. He is the inventor of the US-patented Laserscribe℠, a device used to engrave a distinctive marking on diamonds, such as a DIN (Diamond Identification Number) number. Ehrenwald is in charge of running IGI’s commercial laboratory and validation division. He is honored to be a senior member of the American Association of Assessors (ASA) and a member of the Twenty-Four Karat Club in New York, a club limited to 200 of the most successful individuals in the world. jewelry industry.
There are 17 references cited in this article that you can view at the bottom of the page.
This article has been viewed 126,187 times.
How do you know if your item is real gold, gold plated or fake gold? By most international standards, anything containing less than 41.7% or 10 karat of gold is considered fake gold. To test gold or jewelry at home, you can do a few simple tests – most of which are readily available things like water, vinegar, and magnets. You don’t have to be a jeweler to know if yours is real or fake – we’ll guide you step-by-step to try gold right now.
Steps
Try gold with household materials
- Real gold also doesn’t rust or tarnish when wet, so if you see a discolored item, it’s probably plated gold.
- You can also soak the gold in a glass bowl of vinegar for 15 minutes. However, this method is a bit more risky because vinegar can damage the semi-precious stones mounted on gold jewelry.
- For example, the silver color can be silver or titanium. Red can be copper or brass.
Jerry Ehrenwald
President of International Gempogical Institute & Gemologist
IGI President, Jerry Ehrenwald, is a New York-based gemologist who has spent his life in the industry. He is the inventor of the US-patented Laserscribe℠, a device used to engrave a distinctive marking on diamonds, such as a DIN (Diamond Identification Number) number. Ehrenwald is in charge of running IGI’s commercial laboratory and validation division. He is honored to be a senior member of the American Association of Assessors (ASA) and a member of the Twenty-Four Karat Club in New York, a club limited to 200 of the most successful individuals in the world. jewelry industry.
President of International Gempogical Institute & Gemologist
Experts Opinion: Suspicious streaks and discolouration around the edges of jewelry are often a sign that it is fake gold. If the object is not 24k gold (considered pure gold), it will tarnish over time when the base metal is exposed to oxygen.
- Note that most gold objects are often mixed with other metals. Even 14K gold jewelry with 58.3% gold leaves streaks on the skin. You should use additional tests to make sure your item is real gold.
- Ordinary magnets may not be strong enough to try. To be more precise, buy strong neodymium magnets at home improvement stores.
- The magnet test is not entirely certain, as fake gold can also be made of non-magnetic metals, such as stainless steel. In addition, some real gold items also contain ferromagnetic metals, such as iron.
- You can buy unglazed ceramic tiles or ceramic plates online or at building materials stores.
- This test will scratch the gold a little, but it’s usually not obvious. This is much safer than methods that require scraping or acid.
- Another way to test gold is to dab some foundation on your skin and dab it on after it dries. Fake gold often reacts with foundation and leaves a black or green streak.
Check the manufacturer’s mark
- Use a magnifying glass to observe the authentication mark. This mark is sometimes difficult to see with the naked eye, especially on small jewelry such as rings.
- Antique jewelry may not have the mark of authenticity. Sometimes these marks wear out because of time, sometimes the item is never stamped. The stamp became popular in the 1950s in some countries, but in places like India, for example, it was not until 2000 that the stamp was required. [8] X Research Sources
- The numerical scale system is easier to read than the karat scale. For example, the number 375 means that your item has 37.5% gold content.
- The standard level called gold will vary from country to country. In the United States, for example, anything lower than 9K is not considered gold, even a 9K bracelet with 37.5% gold content.
- Counterfeit items may also have a stamp to look like the real thing, so don’t rely on this mark alone unless you’re sure the item is real gold.
- GP stands for gold-plated item, GF means gold-plated, and GEP stands for electrolytic gold-plated. means gpd electroplate.
- Symbols may vary slightly depending on where the gold is produced. For example, gold produced in India has a small triangle symbol representing the gold grading system responsible for the government council, accompanied by a gold content measurement number and a symbol code, such as the letter K is the symbol of the place of sale.
Gold test by density method
- You need to calculate the weight of gold in grams to use later to calculate. If you use ounces, you won’t get accurate results.
- Test tubes graduated in mm are also useful because they give a more precise measurement in the test.
- The amount of water used does not matter much, as long as there is ample space for the gold item. If you fill the tube with water, the water will overflow when you drop the gold in.
- Note that graduated test tubes in ml or cc units are fine. These two units are equal, so you can use both in the test.
- Rewrite the next measurement on paper. Remember that this is the second measurement, not the first.
- For example, if the initial water level is 17 ml and the second measurement after the water rises is 18 ml, you will have a difference of 1 ml of water.
- For example, you have a gold item that weighs 38 g and the amount of water it takes up is 2 ml. Divide 38 by 2 and you get 19 g/mL, which is very close to the density of gold.
- Standard densities vary slightly depending on the type of gold. With 14k yellow gold, the density will be around 12.9 to 13.6 g/mL. With 14K white gold, the density would be 14 g/mL.
- An 18K yellow gold item has an average density of between 15.2 and 15.9 g/mL. An 18K white gold piece has a density between 14.7 and 16.9 g/mL.
- Any object of 22K gold has a density of about 17.7 to 17.8 g/mL.
Use the nitric acid test
- Gold test kits are available online. You can also ask the jewelry store. Most jewelers use this test kit because of its high accuracy.
- The nitric acid test requires engraving on the item. If the gold is of commemorative value or you want to keep it intact, take it to a jeweler instead of trying it on yourself.
- Normal gold does not react with acids, so your item could be plated gold or an impure alloy.
- The reaction that produces a milky white color is usually indicative of gilded sterling silver. If the acid turns yellow, you have a gilded brass item.
- The acids in the gold test kit have increasing concentration, so the acid used to test 22K gold is stronger than the acid used to test 12K gold. If the 16K gold test acid breaks down gold but the 14K gold acid doesn’t, then you will know your item is about 14K.
Jerry Ehrenwald
President of International Gempogical Institute & Gemologist
IGI President, Jerry Ehrenwald, is a New York-based gemologist who has spent his life in the industry. He is the inventor of the US-patented Laserscribe℠, a device used to engrave a distinctive marking on diamonds, such as a DIN (Diamond Identification Number) number. Ehrenwald is in charge of running IGI’s commercial laboratory and validation division. He is honored to be a senior member of the American Association of Assessors (ASA) and a member of the Twenty-Four Karat Club in New York, a club limited to 200 of the most successful individuals in the world. jewelry industry.
President of International Gempogical Institute & Gemologist
For added peace of mind, take the item to a reputable gold expert to determine its quality.
Advice
- Most of the gold testing methods here are not absolutely accurate. You may have to try several times to determine the authenticity of the gold.
- You’ve probably also heard that people often bite into gold to see if it’s real because real gold will have teeth marks on it. However, since most gold items are made of harder alloys, don’t try gold this way to protect your teeth.
- When sellers say their gold is 24K gold they mean 99.9% pure gold with a minimal amount of other metals. The 22K gold item has 22 parts of gold and 2 parts of other metals. [21] X Research Source
- In gold objects of less quality than 24K gold, other metals will give the object its color and hardness. Pure gold is very soft, so other metals such as silver and copper are added to increase the durability of the gold item.
- White gold, yellow gold, red gold and rose gold jewelry are all alloys of gold and other metals.
- If you need help identifying real gold, take the item to a jeweler or gold expert.
Warning
- Nitric acid is a strong acid that can burn your skin and damage your precious gold. If you’re not comfortable with this method, you can do the tests at home with vinegar, which is a milder acid, or you can have a specialist or jeweler test it with nitric acid.
Things you need
Gold test with household materials
- Yellow
- Jar
- Water
- Vinegar
- Dropper
- Neodymium magnet
- Ceramic tile or unglazed ceramic plate
Check marks and symbols
- Yellow
- Magnifying glass
Perform density test
- Yellow
- Weigh
- Graded tube or measuring cup
- Computer
Using nitric acid
- Yellow
- Gold Tester
- Nitric Acid
- Stainless steel container
- Touchstone
- Latex Gloves
This article was co-written by Jerry Ehrenwald. IGI President, Jerry Ehrenwald, is a New York-based gemologist who has spent his life in the industry. He is the inventor of the US-patented Laserscribe℠, a device used to engrave a distinctive marking on diamonds, such as a DIN (Diamond Identification Number) number. Ehrenwald is in charge of running IGI’s commercial laboratory and validation division. He is honored to be a senior member of the American Association of Assessors (ASA) and a member of the Twenty-Four Karat Club in New York, a club limited to 200 of the most successful individuals in the world. jewelry industry.
There are 17 references cited in this article that you can view at the bottom of the page.
This article has been viewed 126,187 times.
How do you know if your item is real gold, gold plated or fake gold? By most international standards, anything containing less than 41.7% or 10 karat of gold is considered fake gold. To test gold or jewelry at home, you can do a few simple tests – most of which are readily available things like water, vinegar, and magnets. You don’t have to be a jeweler to know if yours is real or fake – we’ll guide you step-by-step to try gold right now.
Thank you for reading this post How to Identify Real Gold at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: