You are viewing the article How to Fix a Loose Toilet Seat at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Dave Jones. Dave Jones is a plumber and installer and vice president for the Midwest at Roto-Rooter Plumbing & Water Cleanup. In 1992, Jones joined Roto-Rooter as a pipeline maintenance technician at the age of 18. From there, he went through different positions with increasing title. Dave served as general manager of Roto-Rooter’s Charlotte, North Carpina and its Atlanta, Georgia branches before being promoted to regional manager and later to regional vice president. Dave is licensed to practice plumbing installation and repair in Pennsylvania, North Carpina, and Georgia.
This article has been viewed 3,844 times.
When the toilet seat is loose, you need to tighten it. The seat is usually attached to the toilet with bolts and nuts. Use a screwdriver to tighten these bolts to fix the loose seat. If the seat base is severely damaged, you should consider buying and replacing it.
Steps
Tighten the seat
- On cheap toilets, screws are usually made of plastic. However, most high-end toilets use steel screws, and even more expensive models can use stainless steel or brass. [2] X Research Source You need to be especially careful when removing plastic screws!
- Choose a screwdriver of the right size. The screwdriver should be sized to fit the bolt head. If the screwdriver is too small, you will not be able to turn the bolt. Friction when the screwdriver slips will cause the bolt head to wear down and become unusable.
- To loosen the nut, you can spray WD 40 anti-rust and lubricate solution and wait 5 minutes.
Replace the seat
- It is recommended that you purchase a seat that is of the same brand and is designed specifically for your toilet so that it can be fitted properly. Other brands can also fit, but will not fit correctly.
- Note: Compared to wooden seats, plastic seats are easier to clean and durable.
- Keep the bolts and nuts of the old seat in case you need to replace the bolts later.
Advice
- If the seat bolts are damaged, you can buy regular plastic ones at hardware stores.
- Check that the slot on the screw cover is designed for pry. Some seats use a small screw that can be identified by the notches on the lid.
- If you want to completely replace the seat, don’t forget to consider between two types: round and elongated. Look at the front of the toilet to see if it’s rounded or elongated. You can also check the product packaging if it is still available.
Things you need
- Big head screwdriver
- Small head screwdriver
- Small pliers
This article was co-written by Dave Jones. Dave Jones is a plumber and installer and vice president for the Midwest at Roto-Rooter Plumbing & Water Cleanup. In 1992, Jones joined Roto-Rooter as a pipeline maintenance technician at the age of 18. From there, he went through different positions with increasing title. Dave served as general manager of Roto-Rooter’s Charlotte, North Carpina and its Atlanta, Georgia branches before being promoted to regional manager and later to regional vice president. Dave is licensed to practice plumbing installation and repair in Pennsylvania, North Carpina, and Georgia.
This article has been viewed 3,844 times.
When the toilet seat is loose, you need to tighten it. The seat is usually attached to the toilet with bolts and nuts. Use a screwdriver to tighten these bolts to fix the loose seat. If the seat base is severely damaged, you should consider buying and replacing it.
Thank you for reading this post How to Fix a Loose Toilet Seat at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: