You are viewing the article How to Cover Hair with Keratin at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Patrick Evan. Patrick Evan is the owner of Patrick Evan Salon, a hair salon in San Francisco. He has been a hair stylist for over 25 years and a salon owner for over 15 years. Patrick Evan Salon was rated by Allure magazine as the best hair salon in San Francisco.
There are 10 references cited in this article that you can view at the bottom of the page.
This article has been viewed 10,177 times.
Keratin is a protein that forms the structure of hair, and also protects hair from damage and stress. Hair care products containing keratin can smooth frizzy and frizzy hair and increase shine for up to two and a half months. [1] X Source of Research The keratin product is applied to thoroughly washed and dried hair, without rinsing, then blow-dried and straightened. Leave product on hair for at least 2 days before washing hair again. During this time, you should avoid hair ties or hair clips. Wash your hair only when necessary and use a sulfate-free shampoo (no conditioner).
Steps
Choose a keratin coating solution
- For example, if you have light hair, your hairdresser can adjust the formula so that it doesn’t change your hair tone. [4] X Research Sources
- If you’re going to a hair salon, it’s a good idea to talk to your hairdresser first so they can choose a recipe for your hair.
Patrick Evans
Owner, Patrick Evan Salon
Patrick Evan is the owner of Patrick Evan Salon, a hair salon in San Francisco. He has been a hair stylist for over 25 years and a salon owner for over 15 years. Patrick Evan Salon was rated by Allure magazine as the best hair salon in San Francisco.
Owner, Patrick Evan Salon
Patrick Evan, owner of Evan Salon, explains: “Kertin coating is a technique that allows keratin to penetrate the porous parts of the hair fiber to increase shine and smoothness, while reducing frizz or frizz. First, the hair will be washed. and deep clean to remove impurities.The keratin product is then applied to the hair section by section, blow-dried, and then pressed into the hair so that the product adheres firmly to the hair. keratin takes about 90 minutes.”
- Because it is commonly used in hair salons, formaldehyde can be harmful to people who are regularly exposed to it. [8] X Trusted Source US Occupational Safety and Health Administration Go to source
- DMDM hydantoin, glyoxal, imidazpidinyl urea, diazpidinyl urea, methyl glycp, ppyoxymethylene urea, quaternium-15, and sodium hydroxymethylglycinate are all formaldehyde-releasing chemicals that may be present in hair care products. [9] X Research Source
- Products that do not contain harmful chemicals are usually not very effective at softening frizzy hair.
Shampoo and part hair
- Descaling shampoos are formulated to remove residue build-up left by hair care products, such as conditioners or styling products. This is a step that prepares the hair to absorb the keratin product evenly.
- Descaling shampoos are also known as “deep cleansing shampoos.”
- Brazilian straightening requires hair that is still slightly damp (85-90% dry), while keratin therapy requires completely dry hair. Since the terms “Brazil” and “keratin” are sometimes used interchangeably when it comes to hair treatments, it’s important to carefully read the instructions on the product label.
Keratin coating and hair drying
- If the product you are using has instructions that differ from this article, follow the manufacturer’s instructions.
- Hair can burn and break if you use a straightener that is too hot.
Keratin coating maintenance
- Try dry shampoo if you need to clean your hair. [16] X Research Source
- Hair ties or clips can create marks in your hair, but loose ties are fine. [18] X Research Sources
Warning
- Take care not to get the product in or near the eyes.
- See a dermatologist before applying keratin to your hair if you have psoriasis or atopic dermatitis. [21] X Research Source
Things you need
- Shampoo cleans hair residue
- Hairdryer
- Comb with tight teeth
- Hairclip
- Hair hood
- Old clothes or robes
- Glove
- Straightener
- Sulfate-free shampoo
- Keratin products
This article was co-written by Patrick Evan. Patrick Evan is the owner of Patrick Evan Salon, a hair salon in San Francisco. He has been a hair stylist for over 25 years and a salon owner for over 15 years. Patrick Evan Salon was rated by Allure magazine as the best hair salon in San Francisco.
There are 10 references cited in this article that you can view at the bottom of the page.
This article has been viewed 10,177 times.
Keratin is a protein that forms the structure of hair, and also protects hair from damage and stress. Hair care products containing keratin can smooth frizzy and frizzy hair and increase shine for up to two and a half months. [1] X Source of Research The keratin product is applied to thoroughly washed and dried hair, without rinsing, then blow-dried and straightened. Leave product on hair for at least 2 days before washing hair again. During this time, you should avoid hair ties or hair clips. Wash your hair only when necessary and use a sulfate-free shampoo (no conditioner).
Thank you for reading this post How to Cover Hair with Keratin at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: