How to Construct a Zip Line: 5 Steps (with Pictures)

X

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 18 people, some anonymous, worked to edit and improve it over time.

This article has been viewed 157,341 times.
Learn more…

Making a zip line is easy, but safety requirements take time to think about.

Steps

1. 1Select a distance between two solid objects, Preferably the objects should be trees or other solid structures. The distance should be anywhere from 50 feet (15.2 m) to 500 feet (152.4 m).
2. 2Lay the cable out between the two points. You will need enough cable so there is suitable slack when it’s stretched out between the two points. This slack should form a belly in the cable between the points. You never want to stretch the cable too tight.[1] X Research source This creates a dangerous situation of speed and crashing at the other end, and your last words will be, “Hey, watch this!” before you’re taken to the hospital.Advertisement
3. 3Attach cable to one point. If you are attaching to a tree, wrap the cable around the tree a few times and then clamp the free end to the leading end. Use high quality clamps that are sized for the cable diameter. These clamps will require you to tighten with a socket set. Two clamps six inches apart are good. Three or four clamps add the necessary safety.[2] X Research source The other end of the cable is where you will tighten it up and raise it off the ground.
4. 4Attach a temporary cable clamp about 20 feet (6.1 m) from the end of the cable. Attach the winch to this clamp and to a point on the tree. Winch the cable up. Once it’s winched up, the free end of the cable can be wrapped around the tree and then clamped on its leading end to hold it in place.[3] X Research source Try to have the clamps about 8-feet from the tree. At this point the winch can be taken off the first clamp and then reinstalled on the furthest out permanent cable clamp. This allows for adjustments to be made on the cable. As the cable stretches, it will need to be tightened with the winch.
5. 5Determine who goes first. This is a nerve-wracking decision. Testing the zip line is important.[4] X Research source

Advertisement

Community Q&A

Search

• QuestionHow do I make sure a zip line has the right amount of rope?Community AnswerWhen you buy the cables for the the zip line, just make sure you have 15-20 ft. of extra cable to account for slack. (You’ll need to measure the length of your zip line area as well.)
• QuestionHow can you set up a zip line if you don’t have any trees?Community AnswerYou would have to build a system that would replace the trees, like some steel posts. They must be able to hold the weight though. It will be more difficult and costly.
• QuestionHow do I get the other end of the cable to the other side?RaifCommunity AnswerYou can lasso it to someone on the other side and the one on the other side can tie it on the object. If there is noone on the other side, you will have to engineer something that can help you.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Thanks for submitting a tip for review!

Things You’ll Need

• 1/4 or 3/8-inch steel-cable
• Come-along manual winch
• Properly sized cable clamps
• Ladder
• zip roller

References

About This Article

Thanks to all authors for creating a page that has been read 157,341 times.

Did this article help you?

Advertisement