You are viewing the article How to Clean Beauty Blender Sponge at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Melissa Maker. Melissa Maker is the channel owner and editor of CleanMySpace, a YouTube channel and blog with over 1 million subscribers. She has over 10 years of professional cleaning experience and provides helpful advice for families.
This article has been viewed 30,688 times.
Regular makeup sponges can be discarded after one use, but Beauty Blender and similar sponges are designed for long-term use. Therefore, you will need to clean this sponge regularly to remove stains and bacteria.
Steps
Basic hygiene
- Baby shampoos and organic “mild formulas” also work well, but you can also use soaps that are safe for skin or hair.
- You should get enough water to submerge the sponge. If there is a shortage of water, you can gradually add water until you have enough water.
- When you soak the sponge, you will see the water begin to change color. The water will have a deep beige or brown color because foundation and other cosmetics dissolve in the water.
- The sponge also expands to its full extent when soaked in soapy water.
- Take 2-3 minutes to rub the soap onto the sponge. Use only fingertips; Do not use a brush or other cleaning tool as this will damage the sponge.
- You may need to gently squeeze the sponge under the tap to remove soap and cosmetics from the sponge.
- If the sponge is still wet after blotting it dry with a paper towel, place it in a dry place to continue drying. Wait until the sponge is completely dry before applying makeup.
Deep cleaning
- This usually happens when you use your sponge several times a day or if you forget to clean it after a week or a long time.
- You will know if a deep cleaning is needed by looking at it. If the water is still dirty when rinsing the sponge in the basic cleaning step, or if there is still a stain after the sponge is dry, perform a deep cleaning step.
- Or you can place the sponge in a bowl of warm water for 5 to 10 seconds. You don’t have to use soapy water or wait for the water to change color before moving on to the next step.
- As with basic cleaning, only a mild detergent should be used to clean the sponge. The most effective is to use a product specifically designed for cleaning sponges, but if you prefer another option, you can use castile soap, baby shampoo or organic shampoo formulated for sensitive skin.
- You should scrub harder and more often than you would in the basic cleaning step. Note, however, that you should still be careful not to deform or tear the foam.
- While scrubbing, the cosmetic layer deep inside the sponge will float to the surface. You should see foam in your palm the color of your foundation.
- You may need to rinse the sponge for a few minutes before all the soap is removed. It is important that you rinse off all the soap, so don’t rush to shorten the time.
- Rub more soap on the sponge and continue scrubbing into the palm of your hand. If the soap bubbles are white instead of gray or beige, the sponge is clean.
- The sponge may still be damp after this step, so place it in a dry place and let it dry. Use the sponge to apply makeup only when it is completely dry.
Heat sterilization
- You’ll need to sterilize your sponge more than once a month if you’re seeing bacteria build up quickly. Signs of bacteria growth are an atypical pimple on the skin and a foul/unusual odor from the inside of the sponge.
- Note that you still need to perform the usual cleaning procedure after sterilizing the sponge. Sterilization kills only bacteria; It will not remove traces of cosmetics or foundation.
- You have to put the sucker in the water. Do not microwave dry sponge as this will damage the sponge or cause it to catch on fire.
- Watch the sucker while you microwave it. Don’t panic if the sponge expands or smokes a little, but turn off the microwave immediately if you notice the sponge is too swollen or has a lot of smoke.
- The sucker gets very hot when the microwave stops working, and the waiting period is for your own protection. You can remove the sponge when it is cool enough to touch.
- If you want to perform basic cleaning after heat sterilization, do so as soon as you remove the sponge from the microwave without drying it.
- Wait until the sponge is completely dry before applying makeup.
Advice
- Regular cleaning will clean the cosmetics on the surface of the sponge and maybe a little more cosmetics deep inside the sponge. In addition, it can also kill bacteria on the surface. Leaving dirty sucking for a long time will promote the reproduction of bacteria.
- Clean the sponge every 1 or 2 weeks. If you use a sponge every day, you should clean it after a week. Even if you only use a sponge a few times a week, you should still clean it every two weeks.
Things you need
Basic hygiene
- Small bowl
- Water
- Solid or liquid mild detergent
- Sink
- Tissue
Deep cleaning
- Solid or liquid mild detergent
- Sink
- Tissue
Heat sterilization
- Bowl for use in the microwave
- Water
- Microwave oven
- Tissue
This article was co-written by Melissa Maker. Melissa Maker is the channel owner and editor of CleanMySpace, a YouTube channel and blog with over 1 million subscribers. She has over 10 years of professional cleaning experience and provides helpful advice for families.
This article has been viewed 30,688 times.
Regular makeup sponges can be discarded after one use, but Beauty Blender and similar sponges are designed for long-term use. Therefore, you will need to clean this sponge regularly to remove stains and bacteria.
Thank you for reading this post How to Clean Beauty Blender Sponge at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: