You are viewing the article How to Calculate Data Transfer Rate at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 4,661 times.
Data transfer rate (DTR) is the rate at which a certain amount of data is transferred in a specific period of time. You’ll probably want to know what this speed is if you’re downloading something from the internet or transferring data from one source to another. First, convert the units so that the file size and transfer rate are both bits or bytes and have the same prefix (kilo, mega, giga, or tera). Then fit your number into the formula S = A ÷ T, where A is the amount of data and T is the transfer time to calculate S (the baud rate). You can also calculate the amount of data or the transfer time if you know either of these variables and the transfer rate.
Steps
Change units
- Pay attention to whether the letter is uppercase or lowercase. For example, Bits are represented by a lowercase “b”, and bytes are represented by a capital “B”.
- 8 bits (b) = 1 byte (B); convert bits to bytes by dividing 8, or convert bytes to bits by multiplying 8.
- 1,024 bytes = 1 Kilobyte (KB); convert bytes to Kilobytes by dividing 1,024 or convert Kilobytes to bytes by multiplying 1,024.
- 1,024 Kilobytes = 1 Megabyte (MB); convert Kilobytes to Megabytes by dividing 1024 or convert Megabytes to Kilobytes by multiplying 1,024.
- 1,024 Megabytes = 1 Gigabyte (GB); convert Megabytes to Gigabytes by dividing 1024 or convert Gigabytes to Megabytes by multiplying 1,024.
- 1,024 Gigabytes = 1 Terabyte (TB); convert Gigabytes to Terabytes by dividing 1024 or convert Terabytes to Gigabytes by multiplying 1,024.
- To convert seconds to hours, divide by 3,600 (60 x 60). Or convert hours to seconds by multiplying 3,600.
- Usually, speed is expressed in seconds. However, if there are too many seconds like in a large file, you can change it to minutes or even hours.
Calculate speed, time and data transmission
- Take for example the case where you transferred 25 MB in 2 minutes. First, let’s convert 2 minutes into seconds by multiplying 2 by 60 equals 120. So, S = 25 MB ÷ 120 seconds. 25 ÷ 120 = 0.208. Accordingly, the transfer rate is 0.208 MB/s (Megabytes per second). If you want to convert to Kilobytes, multiply 0.208 by 1024. 0.208 x 1024 = 212.9. The resulting transfer rate after conversion is 212.9 KB/s (Kilobytes per second).
- Example: Let’s say you transferred 134 GB at 7 MB/s (7 MB per second). First, convert GB to MB so that the parts of the formula have the same units. 134 x 1,024 = 137,217. Thus, you transferred 137,217 MB at a rate of 7 MB/s. To calculate T, divide 137,217 by 7, resulting in 19,602. Accordingly, the transmission time is 19,602 seconds. To convert to hours, divide by 3,600, resulting in 5.445. In other words, it took 5,445 hours to transfer 134 GB at 7 MB/s.
- If you want to convert to hours and minutes, split the number and decimal: You will have 5 hours and 0.445 hours. To convert 0.445 hours to minutes, multiply by 60. 0.445 x 60 = 26.7. To convert decimals to seconds, multiply by 60. 0.7 x 60 = 42. In short, the transmission time is 5 hours, 26 minutes, and 42 seconds.
- Example: You can calculate the amount of data transferred in 1.5 hours at 200 bps (bits per second). First, convert the hours to seconds by multiplying 1.5 by 3,600 by 5,400. Accordingly, A = 5,400 seconds x 200 bps. A = 1,080,000 bps. To convert to bytes, divide 8. 1.080,000 ÷ 8 = 135,000. To convert to Kilobytes, divide 1,024. 135,000 ÷ 1,024 = 131.84. Thus, 131.84 KB of data was transferred in 1.5 hours at 200 bps.
Advice
- You can easily find a calculator on the internet that does some math for you, like this one: http://www.calctop.org/CALC/prof/computing/transfer_time
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 4,661 times.
Data transfer rate (DTR) is the rate at which a certain amount of data is transferred in a specific period of time. You’ll probably want to know what this speed is if you’re downloading something from the internet or transferring data from one source to another. First, convert the units so that the file size and transfer rate are both bits or bytes and have the same prefix (kilo, mega, giga, or tera). Then fit your number into the formula S = A ÷ T, where A is the amount of data and T is the transfer time to calculate S (the baud rate). You can also calculate the amount of data or the transfer time if you know either of these variables and the transfer rate.
Thank you for reading this post How to Calculate Data Transfer Rate at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: