Honda civic 2016 Keyless Remote Battery Replacement

Introduction

Honda Civic 2016 uses Keyless Remote to start the engine in addition to a normal lock/ unlock mechanism. Without battery, the car cannot be started. This guide show how to replace the Lithium battery inside Honda Civic 2016 Keyless Remote.

What you need

1. • Make sure to have replacement battery ready. You will need 1 pc of CR 2032 Lithium battery.

   • Remove the metal key by sliding the switch on the back of the remote and pulling the key out.

2. • After removing the key, you will see 2 plastic bars. This is a place where you can split the remote open.

   • The manufacturer recommeded using a coin but any hard tool or even the key itself will work as well.

   • The manufacturer recommended using a cloth covering your coin/ tool to prevent it from denting the plastic bars.

3. • Now you can gently pry it open

   • Removing the old battery from the left side.

   • Remember that the + side of the battery is facing up.

4. • Inserting a new CR 2032 battery from the right side first and then press the battery down. It should make a good ‘click’ sound

   • Again, make sure the + side of the battery is facing upward.

To reassemble your device, follow these instructions in reverse order.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

7 other people completed this guide.