recover radio code

recover radio code

#1

Registered!!

Thread Starter

Join Date: Jan 2010

Posts: 42

Likes: 0

Received 0 Likes on 0 Posts

Rep Power: 0

recover radio code

hi everybody.
please help.
honda civic 2009
i tried to recover my radio code
i pushed :6 and 1+power but i got onlyIAG,and nothing else.
so is there anything to do more?
thanks.

please help.

honda civic 2009

i tried to recover my radio code

i pushed :6 and 1+power but i got only

so is there anything to do more?

thanks.

#2

If you think a good mechanic is expensive, try hiring a bad one

Re: recover radio code

Somehow you got into the diagnosis area.
Does the radio display show “CODE” when you turn it on? If you started to enter numbers the full word CODE won’t be displayed.
Did you check for the white sticker with the serial number and/or 5 digit unlock code?
In/on/around the glovebox, door jamb, battery bracket?
Of course there’s the card, but the same stickers could have been placed just about anywhere
Thin blue owners book labeled “Honda service history” that had handwritten info the first page may have the radio code written in it
From Hondas website:

Does the radio display show “CODE” when you turn it on? If you started to enter numbers the full word CODE won’t be displayed.

Did you check for the white sticker with the serial number and/or 5 digit unlock code?

In/on/around the glovebox, door jamb, battery bracket?

Of course there’s the card, but the same stickers could have been placed just about anywhere

Thin blue owners book labeled “Honda service history” that had handwritten info the first page may have the radio code written in it

From Hondas website:

1. Turn the ignition switch to ON.
2. Turn ON the device and confirm that the display reads COdE. If you don’t see this message, pull the backup fuse for 1 minute, and then go back to step 1.
3. Turn OFF the device.
4. Press and hold the 1 and 6 radio preset buttons, and turn ON the device.
5. The display toggles between two screens: U with the first 4 digits of the serial number (U2200 for example,)
6. And L with the last 4 digits of the serial number (L0055 for example.)
7. Ignore the U and L and record all 8 digits

#3

If you think a good mechanic is expensive, try hiring a bad one

Re: recover radio code

From Hondas website:

1. Turn the ignition switch to ON.
2. Turn ON the device and confirm that the display reads COdE. If you don�t see this message, pull the backup fuse for 1 minute, and then go back to step 1.
3. Turn OFF the device.
4. Press and hold the 1 and 6 radio preset buttons, and turn ON the device.
5. The display toggles between two screens: U with the first 4 digits of the serial number (U2200 for example,)
6. And L with the last 4 digits of the serial number (L0055 for example.)
7. Ignore the U and L and record all 8 digits