You are viewing the article How to Share Internet Connection on Android for Windows 7 at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Luigi Oppido. Luigi Oppido is the owner and operator of Pleasure Point Computers in Santa Cruz, CA. He has over 25 years of experience in general computer repair, data recovery, antivirus and upgrade.
This article has been viewed 2,604 times.
This article shows you how to connect Android to a Windows 7 computer and then use Android’s data to connect to the Internet. This process is called tethering. You can share your Android’s connection to your computer using a USB port or a wireless hotspot.
Steps
Using the USB port
- USB tethering with Android phones is a Windows-only feature. [1] X Research Source
in the upper right corner of the drop-down menu.
- On some Android phone models, you’ll have to swipe down with two fingers.
- On your Samsung tablet or phone, you need to tap Connections .
- On Samsung Android, you need to tap Mobile Hotspot and Tethering .
. This switch will turn green
. The computer is now wired (LAN) to the Internet via Android data.
- Open Device Manager: click Start , click the search bar, type device manager , then click Device Manager .
- Double-click Network adapters .
- Right click on Remote NDIS based Internet Sharing Device .
- Click Update Driver Software… .
- Click Browse my computer for driver software .
- Click the Let me pick button at the bottom of the window.
- Uncheck the box “Show compatible hardware”.
- Click Microsoft Corporation in the “Manufacturer” column.
- Click Remote NDIS Compatible Device , then click Next .
- Click Yes and then Close when prompted.
Use an access point
located in the upper right corner of the drop-down menu.
- For some Android phone models, you’ll have to swipe down with two fingers.
- For Samsung tablets or phones, you need to tap Connections .
- For Samsung Android, you need to tap Mobile Hotspot and Tethering .
- On Samsung, tap the white “Mobile hotspot” switch to turn on the mobile hotspot. You can then change the password by tapping Password , typing a new password, and then tapping SAVE . Once you’re done, you can skip to the “Open your computer’s Wi-Fi settings” step.
- Network name — The Android name to be displayed in the wireless network section of your computer.
- Security — Touch the WPA2 option from this menu.
- Password — The password you will use to log in.
. This switch is located at the top of the Hotspot & Tethering page. The switch will turn green
. Now Android will broadcast the Wi-Fi signal.
- You may have to click ▲ to see the Wi-Fi icon.
- If you did not create a password during installation, the password of the access point network will be listed in the access page under Android’s Settings. You may need to touch the name of the access point to see the password.
Advice
- You can also use Bluetooth to share your phone’s tethering, although Bluetooth is much slower and less stable than USB or an hotspot.
Warning
- Tethering eats up data quickly, especially when you’re downloading or playing videos. You’ll likely see an increase in your monthly bill if you’re tethering frequently.
This article was co-written by Luigi Oppido. Luigi Oppido is the owner and operator of Pleasure Point Computers in Santa Cruz, CA. He has over 25 years of experience in general computer repair, data recovery, antivirus and upgrade.
This article has been viewed 2,604 times.
This article shows you how to connect Android to a Windows 7 computer and then use Android’s data to connect to the Internet. This process is called tethering. You can share your Android’s connection to your computer using a USB port or a wireless hotspot.
Thank you for reading this post How to Share Internet Connection on Android for Windows 7 at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: