You are viewing the article How to Make a Hand Strap at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Luba Lee, FNP-BC, MS. Luba Lee is a licensed family physician practicing in Tennessee. She received her MSN from the University of Tennessee in 2006.
There are 11 references cited in this article that you can view at the bottom of the page.
This article has been viewed 2,972 times.
The arm strap has the function of immobilizing and protecting the injured arm. Although commonly used for broken bones, slings are also worn during concussions, sprains and dislocations, or in emergency situations when a serious injury is suspected. Regardless of the nature of the arm injury, a sling is often an essential part of the recovery process, because in addition to supporting the arm, it also signals people to be careful with the arm. your. Knowing how to make an improvised sling is a useful first aid skill; it has a protective role and makes the victim more comfortable while waiting for medical assistance.
Steps
Use a piece of fabric to make a hand strap
- A simple way to get a 1-foot square piece of fabric is to use scissors or a knife to cut an old pillowcase or bedspread that you no longer use. When it’s urgent, you can even tear the fabric by hand to fit the desired size.
- When making a sling, it’s better to use a piece of fabric that’s too wide than too small . You can adjust the sling that’s too long by tying the knot behind your head while you’re wearing it, but there’s no way to loosen the sling when the fabric isn’t long enough.
- If for some reason you find the sling isn’t comfortable when folded in half, you can cut the fabric diagonally to create the same shape.
- First, wash the open wound BUT do not use water that is too hot or too cold. Open the faucet slowly, do not let the water flow strongly. If you do anything that is not recommended, your arm will definitely hurt more.
- Remove grit or other debris with clean tweezers if water cannot be removed.
- Dressing. Use a bandage to cover the wound without letting the glue stick to the wound. If needed, you can place a clean gauze pad over the wound before dressing.
- You may also have to use a brace. In this case, you will need a brace before you can wear the sling.
- Do not touch the wound directly, unless you are experienced with medical care.
- Adjust so that your fingers stick out just enough outside the edge of the fabric so that you can perform simple movements, such as writing, while your hand is still supported in the sling.
- If the knot pressing on the nape of your neck is uncomfortable, put a pad or towel underneath.
- Remember to avoid the hairs at the nape of your neck when tying the knot. If you accidentally tie your hair into a knot, you will get a painful jerk every time you move your arm or walk.
- Standing position when wearing a sling: Keep your back straight, shoulders slightly back but relaxed. Raise your chin and avoid stooping.
- Sitting position when wearing the arm strap: lean back against the chair if the chair has a backrest. Keep your back straight and in an upright position. Lift your head and raise your chin so that your neck stays straight. Both feet are close to the ground. Do not stoop or slouch. You can rest your hand on the armrest of the chair if you feel comfortable.
- While wearing a sling, any time you experience severe back or neck pain, see your doctor. Avoid wearing a sling if you have a neck or shoulder problem.
Improvise the outfit into a belt
- Try to adjust the length of the sleeves so that when tied, your arms can hang at a 90-degree angle (parallel to the ground).
- If you have a safety pin, you can try “closing” the fabric of the shirt at the elbow to make a temporary “stop” for the sling as described in the method above.
- A belt buckle placed on the back of your neck can be uncomfortable, so move the belt so that the buckle is somewhere between your arm and neck. You can also put padding between the waistband and the neck for extra comfort.
- A loop of fabric tape can replace a belt or tie to support wrists, arms, and elbows.
- Use cloth tape to secure the injured arm to the upper body to reduce movement.
- Avoid getting the glue on the skin. The adhesive sides of the fabric tape should be facing each other so as not to stick to the skin.
Handling serious cases
- Common symptoms of a broken arm include: [11] X Research Source
- So hurt
- Ache
- Swelling
- Loss of movement or sensation
- There is a possibility that the wound is open and the bone is protruding out
- Has a different shape than the uninjured arm
- Common symptoms of arm dislocation (most commonly shoulder dislocation) include: [12] X Research Source
- Pain in the arm, shoulder and/or collarbone
- Deformity (swelling above or near the shoulder)
- Swelling
- Bruises
- Do not attempt to reposition broken bones without the help of an experienced medical professional. The exception to this rule is exceptional and rare cases: when you can’t get medical care, and at the same time repositioning a broken bone by hand is better than doing nothing.
- In this case, please read the article “How to fold a broken bone” for more information.
Advice
- To keep the sling in place, you can use a long band to tie around the sling, around the injured arm, but underneath the uninjured arm, and attach it to each other with a safety pin. This prevents the arm from moving when you walk or move.
- If a full-size sling isn’t available, or if recommended, make a simple sling with just the neck and wrists.
- Another idea: Wrap a piece of fabric, towel, tights, tights (anything on hand) around your wrist and around your neck similar to a full-size sling.
- If your arm and shoulder don’t get better even with support (using a sling), you need to see a doctor.
- Try to reduce swelling by applying ice or a frozen bean bag to the injury before it gets too bad. Do not apply ice directly to the skin to avoid further damage. Instead, line a paper towel between your skin and several ice packs.
- Hooded sweatshirts can be used as a sling belt like a long sleeve shirt. Tie the top without the hat, pin the ends together and roll the hat up to cushion the hands!
Warning
- If you suspect a broken arm, wrist or elbow, see your doctor.
- Some shoulder problems, such as frozen shoulder periarthritis, are much worse when you use a sling. See your doctor as soon as possible if the pain does not go away after about a day.
- For vulnerable people and the elderly, slings can aggravate neck problems.
Things you need
- 1 meter square piece of fabric or bed sheet/pillowcase
- Pin
- Soft pad (optional)
This article was co-written by Luba Lee, FNP-BC, MS. Luba Lee is a licensed family physician practicing in Tennessee. She received her MSN from the University of Tennessee in 2006.
There are 11 references cited in this article that you can view at the bottom of the page.
This article has been viewed 2,972 times.
The arm strap has the function of immobilizing and protecting the injured arm. Although commonly used for broken bones, slings are also worn during concussions, sprains and dislocations, or in emergency situations when a serious injury is suspected. Regardless of the nature of the arm injury, a sling is often an essential part of the recovery process, because in addition to supporting the arm, it also signals people to be careful with the arm. your. Knowing how to make an improvised sling is a useful first aid skill; it has a protective role and makes the victim more comfortable while waiting for medical assistance.
Thank you for reading this post How to Make a Hand Strap at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: