You are viewing the article How to Dry a Wet Carpet at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
X
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 5,810 times.
If a small rug gets wet, the best way to deal with it is to remove the carpet from the floor and hang it up or spread it outside until the carpet is completely dry. However, if you have to deal with floor mats or the rug is too large to remove, you may need to try to dry it in place.
Steps
Quick dry wet carpet
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/8/86/Dry-Wet-Carpet-Step-1-Version-5.jpg/v4-460px-Dry-Wet-Carpet- Step-1-Version-5.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/8/86/Dry-Wet-Carpet-Step-1-Version-5.jpg/ v4-728px-Dry-Wet-Carpet-Step-1-Version-5.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight”:410,”licensing”:” <div class=”mw-parser-output”></div>”}
Spread the towel over the wet carpet. Next, you will have to step on the lined area to absorb the water. Remove the wet towels and replace with other dry towels.
- Continue doing this until the carpet is dry.
- You should still check underneath the carpet to make sure the carpet backing and floor are not soaked.
Absorb water on wet carpet. Do not use a regular household vacuum cleaner. You need a vacuum cleaner with a suction function. Most household vacuum cleaners only have a dry vacuuming function, and it is extremely dangerous to use this machine to vacuum wet carpets. Do not use household vacuum cleaners, except for those that allow wet suction.
- Use a wet vacuum to suck until all the water is gone from the carpet. A wet vacuum cleaner will suck up all the water on the carpet but may not be able to suck the carpet backing if the water has seeped through the underside of the carpet or drenched it below the edge of the carpet.
- Pay attention to the water tank of the vacuum cleaner and remember to empty it before the water overflows. Depending on the amount of water on the carpet, you may need to refill the water tank several times.
Increase the rate of water evaporation. You should use this method along with the other two options, as the process will take a long time to complete. You can use ceiling fans, hair dryers, household fans, even dehumidifiers if you have one.
- Aim the fans at the wet area until the water begins to dry.
- As a reminder, you need to check underneath the carpet to make sure the floor and carpeting are not soaked.
Dry the floor mats
Move furniture off the carpet. You need to do this so that you can lift the carpet and inspect the mat and the floor underneath. It is important to move the furniture as quickly as possible so that the carpet treatment can begin.
- If you leave the furniture on the wet carpet, the furniture and the whole floor can be damaged.
Remove as much water as possible. You may not be able to treat the entire floor, but remember you need to check underneath the carpet. There are many ways for you to get rid of water. [1] X Research Source
- Rent a vacuum cleaner with a water suction function. Do not use a regular household vacuum cleaner, because this type of vacuum cleaner cannot absorb water. Use a vacuum cleaner until you can no longer suck.
- Instead of using a wet vacuum, you can rent a carpet cleaner with hot water. Ask carpet cleaning services if they rent machines. This type of machine can suck water out of the carpet, but you will have to test the water underneath.
Check the amount of water underneath the carpet. Absorbing water on the carpet surface is just the beginning. You’ll have to get rid of the water on the floor and under the rug pad, or the floor could warp.
- Walk on the carpet. If you hear a squeaking sound when walking on the carpet, there is definitely water still under the carpet.
Raise the carpet off the floor. Start at a carpet corner. Use pliers and work gloves to separate the carpet from the mat and floor. You will need to dry the floor underneath the carpet to prevent warping. Do not cut the carpet, because it will be difficult for you to put the carpet back in good condition.
- You can also raise the carpet by pulling away from the carpet stopper at one of the carpet corners. You can also peel the carpet up at one edge if the carpet has a short edge that is easy to reach and manipulate.
- Fold the corner or edge of the rug up so the rug pad can be seen.
Blow air between the carpet and the floor. You’ll have to try to dry the mat without having to remove the carpet, especially if the pad is just slightly damp and the floor underneath appears to be dry.
- A dehumidifier when used in a closed room will quickly absorb water from the carpet and can be rented at machine rental services.
- Raise the corner of the carpet or the edge of the carpet and use a fan to blow air under the carpet into the carpet backing. Turn on the heater and open the window to let it dry quickly.
- Attach the suction hose (used for wet suction) to the suction head of the vacuum cleaner and place the straw under the carpet, the back of the carpet on the suction pipe. The hot air lifts the carpet, separates it from the mat, and speeds up the drying process.
Call for professional service. Finally, one of the best ways to deal with carpeting is to call someone who knows how to handle it. It is important that you call the service as soon as possible so that they can salvage the carpet, floors and pads to the maximum extent.
- Make sure the service has a warranty and look for a company that guarantees to dry carpets, pads and floors if necessary.
- Ask your landlord or tenant about insurance. Depending on the cause of the carpet wetting, insurance may cover the cost of carpet cleaning.
Dry the carpet in the car
Do not leave for long. Mold can grow within 24 hours and cause many problems. You will need to dry the carpet as quickly as possible. This not only ensures that mold is avoided, but also prevents water from entering the electrical parts of the vehicle. [2] X Research Source
Determine where the water is leaking from. If you just deal with the carpet on the car without locating and preventing the leak, it will not help much. You will have to keep drying the carpet over and over again.
Remove as much water as possible. Use a vacuum with a suction function or a dehumidifier (or both). These machines are easy to rent. You need to absorb as much water as possible, especially on non-removable rugs.
- Place the dehumidifier in the car until the water appears to be drained.
- You should also remember to use water rags in un-carpeted areas of the vehicle.
Check the pads underneath the carpet. Water will often stagnate underneath the carpet. If this problem is not dealt with, mold can arise. Always start by using pliers and work gloves to peel off a corner of the carpet.
- Avoid cutting the carpet, as it will be difficult to reattach afterwards.
Take all the rugs out. Getting the carpet out of the car is really important, especially when the carpet is in trouble. Carefully peel off the carpet and hang it somewhere to dry.
Dry the carpet. When you take the carpet out of the car, you’ll have to let it dry completely. Most of the water on the carpet has been removed, but you need to make sure the carpet is completely dry to avoid mold growth.
- Spread the towel on the carpet and step on it to let the water soak into the towel. Replace the wet towel with a new, dry, clean towel.
- Use a hair dryer to blow on wet towels. Continue doing this until the towel is completely dry.
Replace carpet. Sometimes the best thing you can do is change the carpet, especially if you or someone in your home is susceptible to mold. Mold will form very quickly, and once present it is very difficult to get rid of.
- Discuss this with a professional before you replace the entire carpet, as it is a radical but important and thoughtful approach.
Advice
- It may be cheaper and better in the long run if you call in professional service right away. They know well how to handle wet carpet, especially in serious cases.
Warning
- Whether you peel the carpet or not, carpets and pads can shrink and seams come loose due to water. Professional service will know how to repair when necessary.
- If the carpet is wet from dirty water, you need to remove it as quickly as possible. Add more clean water to the wet carpet before sucking up the dirty water. Rent a carpet cleaner instead of just using a wet vacuum, and use a carpet cleaner before vacuuming up all the water. If you only vacuum the water, the dirt can stay and stain the carpet.
X
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 5,810 times.
If a small rug gets wet, the best way to deal with it is to remove the carpet from the floor and hang it up or spread it outside until the carpet is completely dry. However, if you have to deal with carpeting or the rug is too large to remove, you may need to try to dry it in place.
Thank you for reading this post How to Dry a Wet Carpet at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: