You are viewing the article How to Use a graphic equalizer at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
wikiHow is a “wiki” site, which means that many of the articles here are written by multiple authors. To create this article, 27 people, some of whom are anonymous, have edited and improved the article over time.
This article has been viewed 4,430 times.
A graphic equalizer is used to change the response of a frequency, or in other words a melody, sound or instrument. With equalizer (referred to as EQ), you can increase/decrease bass, add high tones, and so on. Learning how to use a lever equalizer isn’t too difficult, but it takes practice to get used to.
- Often the bass needs to be increased or decreased very little, and the highs are the key to “clear” sound. After feeling satisfied with the bass, depending on the power of the speaker, you can adjust more high tones (range from the middle to the right) if you are still not satisfied.
- Do not abuse EQ. An equalizer can make up for your shortfall in audio gear, but remember that music producers mix and match with singers’ recordings before the song comes out. Besides, different speakers will sound different, even depending on the location, the same speaker will have a diverse frequency response. So, one of the main features of an equalizer is feedback and adjustment of the frequency response of the speaker.
- Too much sound in one frequency can overwhelm other, smaller sounds.
- You can make it hard to hear, but don’t be afraid to try!
- EQ is a simple but not easy to use effect.
- If you have an equalizer with more than 5-7 tones (levers), it’s best to leave them all equal. If you feel the need to adjust, downgrade the number, not increase it.
Your stereo, especially in a car, can only use a certain amount of voltage, after which the output signal will be cut off. Increasing the frequency means losing power. Increasing the volume in any way requires more voltage.
For example, the voltage that the sound system will draw will be more than the amount of power the amplifier needs to be supplied.
Don’t worry too much about the presets. Most of the presets are geared towards increasing the frequency. The rule is that when increasing one frequency, it is necessary to decrease the other frequency at the same time.
To properly tune the sound really requires specialized equipment.
In the end, EQ cannot save the sound on low-quality equipment, but only used to adjust the sound response in a space such as a closed room/chamber. With high-quality equipment, the sound output will be good if you leave everything balanced. And if you hear the problem range clearly, the EQ is also difficult to fix.
Warning
- You should adjust the volume just right so that the sound is not too loud.
wikiHow is a “wiki” site, which means that many of the articles here are written by multiple authors. To create this article, 27 people, some of whom are anonymous, have edited and improved the article over time.
This article has been viewed 4,430 times.
A graphic equalizer is used to change the response of a frequency, or in other words a melody, sound or instrument. With equalizer (referred to as EQ), you can increase/decrease bass, add high tones, and so on. Learning how to use a lever equalizer isn’t too difficult, but it takes practice to get used to.
Thank you for reading this post How to Use a graphic equalizer at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: