You are viewing the article How to Clean Sticky Plastic Surfaces at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
This article was co-written by Ahmed Mezil. Ahmed Mezil is a hygienist and CEO of Hellamaid, a cleaning company in the suburbs of Southern Ontario, Canada. With over four years of experience in the cleaning industry, Ahmed and his staff at Hellamaid specialize in providing home cleaning, post-construction cleaning, commercial cleaning, deep cleaning and disinfecting cleaning. for townhouses/apartments. Ahmed holds a degree in mechanical engineering from the University of Waterloo, a master’s degree in mechanical engineering from the University of Toronto and holds a license to practice engineering in Ontario, Canada.
This article has been viewed 21,899 times.
Many items made of plastic, such as TV remote controls and other electronic devices that have a hard shell covered with a soft plastic outer layer, can degrade and become sticky over the years. . Plastic surfaces can also become sticky due to an accumulation of oil on people’s hands, from spilled drinks, or from glue left behind when you remove the sticker. Whatever the cause, you can try one of the many simple methods below using common household materials like baking soda, isopropyl alcohol, water, and mild dish soap. Your plastic items will soon look like new again!
Steps
Use baking soda
- The amount of baking soda and water you need will depend on how large the surface of the plastic you want to clean. For example, if it’s a small object like a TV remote, you can use about 1 tablespoon (15 ml) of water and 1 tablespoon (20 g) of baking soda.
- This method effectively cleans a wide variety of plastic items such as plastic dishes, TV remotes, plastic containers, toys and many other monolithic plastic objects.
Warning : Do not use this method to clean the keys on the keyboard as the mixture can get inside and damage the electronic components.
- Do not use anything rough like a scouring pad to rub the mixture onto the surface of the item, as it can scratch the plastic.
- If the item you’re cleaning has a battery, you’ll also need to open the battery compartment and wipe off the baking soda if it gets inside.
- If the item has crevices or grooves that are difficult to clean, you can use something like a toothpick or cotton swab that can get inside the slots to clean the baking soda.
- If you clean the battery compartment with a damp cloth, be sure to open the battery compartment to dry.
Wipe the plastic surface with alcohol
- If you don’t have a rag, you can fold a few paper towels to wipe.
- This method is very effective for removing adhesive residue, such as sticker glue left behind after being removed.
- If you are treating an old, sticky soft plastic surface, note that the item will look brighter and slightly different after it has been wiped with alcohol. However, it won’t stick anymore after you wipe the plastic surface clean.
- Note that if you’re using this method to clean plastic with slits, grooves, or sensitive parts like a keyboard, you need to make sure the cloth is just barely damp so that alcohol doesn’t drip into the crevices. Be careful, only clean plastic surfaces that do not have sensitive parts such as the keyboard surface.
- You can also use rubbing alcohol to clean it, as rubbing alcohol also contains isopropyl alcohol.
- Rub vigorously back and forth or in a circular motion, paying special attention to the most sticky areas.
- Alcohol evaporates very quickly, so you don’t have to worry about drying the item after cleaning.
Warning : Remember that alcohol can discolor some plastics. You should test first on an inconspicuous part of the item for discoloration before wiping the entire surface.
Wash plastic surfaces with soap and water
- This method works best for delicate plastic objects such as playing cards, identification cards, credit cards or other plastic objects that you fear discoloring or damaging the coating.
- Microfiber towels are great for this. You can also cut an old t-shirt into rags and use one to wipe.
- Be sure to scrub all areas that are particularly sticky, such as drink streaks, on the plastic surface until all the sticky residue is completely removed.
Tip : With flat objects like credit cards or identification cards, you can place them on a hard surface like a table and hold them with your non-dominant hand when wiping.
- You can use paper towels if you don’t have a dry cloth. Note that paper towels can leave crumbs behind.
Warning
- Do not put plastic objects in the dishwasher or washing machine to clean. These items need to be cleaned by hand.
- Alcohol can discolor some plastics, so it’s a good idea to test in an inconspicuous spot first if you’re going to use this method.
- Do not attempt to dry plastic objects with a hair dryer or other heat source. You should use a clean rag to wipe or air dry.
Things you need
Use a baking soda mixture
- Baking soda
- Water
- Small container
- Soft cloth
Wipe the plastic surface with alcohol
- Isopropyl alcohol
- Clean rags
Wash plastic surfaces with soap and water
- Small container
- Water
- Dishwashing liquid
- Soft cloth
This article was co-written by Ahmed Mezil. Ahmed Mezil is a hygienist and CEO of Hellamaid, a cleaning company in the suburbs of Southern Ontario, Canada. With over four years of experience in the cleaning industry, Ahmed and his staff at Hellamaid specialize in providing home cleaning, post-construction cleaning, commercial cleaning, deep cleaning and disinfecting cleaning. for townhouses/apartments. Ahmed holds a degree in mechanical engineering from the University of Waterloo, a master’s degree in mechanical engineering from the University of Toronto and holds a license to practice engineering in Ontario, Canada.
This article has been viewed 21,899 times.
Many items made of plastic, such as TV remote controls and other electronic devices that have a hard shell covered with a soft plastic outer layer, can degrade and become sticky over the years. . Plastic surfaces can also become sticky due to an accumulation of oil on people’s hands, from spilled drinks, or from glue left behind when you remove the sticker. Whatever the cause, you can try one of the many simple methods below using common household materials like baking soda, isopropyl alcohol, water, and mild dish soap. Your plastic items will soon look like new again!
Thank you for reading this post How to Clean Sticky Plastic Surfaces at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: