You are viewing the article How to Make Flowers with Tissues at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
X
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 7,462 times.
Flowers made of tissue paper are beautiful decorations and used to decorate the party. This flower is eye-catching and colorful but inexpensive and very easy to make. Choose a flower like a dahlia, rose, or hydrangea and follow the instructions. To stack these different types of flowers, you will need materials such as paper towels, scissors, wire rope, and glue.
Steps
Make dahlia flowers with paper towels
Stack 12 sheets of paper towels on top of each other. You can choose paper in any color. Usually flowers will look more realistic when you use 12 hours of paper in the same color. Use regular paper of 33x51cm to create large decorative flowers. [1] X Research Source
- If you make flowers to decorate the party, choose a color that matches the main color of the party.
Fold the 12 sheets of paper on top of each other in a fan-folding fashion. Start with a 2.5cm fold, then fold the next by alternating sides. Tighten each fold to keep the shape. When you’re done, you’ll have a stack of stacks of paper that’s 2.5cm wide. [2] X Research Source
Round off the ends of the paper with scissors to make the petals look more realistic. Use sharp scissors to round or sharp the ends of the paper. This is an extra editing step that makes your confetti look real. [3] X Research Sources
- Make sure the scissors you use are strong and sharp to cut multiple layers of paper at once. Scissors that are too blunt will damage the paper and create rough cuts.
Cut a wire about 46cm long to make flower branches. Fold the wire in half and clip it to the center of the stack, then twist the wire to secure it. Trim the wire if needed or add more green floral tape. [4] X Research Sources
- Flower wire is effective and beautiful to use, but you can also use velvet yarn to make flower branches. [5] X Research Sources
Spread each layer of petals. Split and spread each layer of petals, each time you pull each layer of paper to the center point of the flower. This will inflate the petals and create a beautiful cascading effect that looks like real flowers when they open. Leave a small space in the center of the flower. [6] X Research Sources
- If you want to display flowers on the wall or on the tabletop, simply separate and inflate the top layers of paper. The underside of the flower will be flat for easy lying on a flat surface.
- If you want to hang flowers suspended, such as tied to a string hanging from the ceiling, it is advisable to inflate both sides of the flower. Leave some space in between the two sides of the flower.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/5/56/Make-Tissue-Paper-Flowers-Step-6-Version-6.jpg/v4-460px-Make-Tissue- Paper-Flowers-Step-6-Version-6.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/5/56/Make-Tissue-Paper-Flowers-Step-6- Version-6.jpg/v4-728px-Make-Tissue-Paper-Flowers-Step-6-Version-6.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight” :410,”licensing”:”<div class=”mw-parser-output”></div>”}
Paper flower decoration. Arrange flowers to decorate parties such as outdoor parties, girls’ birthday parties, baby showers and brides’ bachelor parties.
- To hang flowers, you will tie a long enough string to the wire and hang it from the ceiling. [7] X Research Sources
Make a rose with a tissue
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/9/9b/Make-Tissue-Paper-Flowers-Step-7-Version-6.jpg/v4-460px-Make-Tissue- Paper-Flowers-Step-7-Version-6.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/9/9b/Make-Tissue-Paper-Flowers-Step-7- Version-6.jpg/v4-728px-Make-Tissue-Paper-Flowers-Step-7-Version-6.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight” :410,”licensing”:”<div class=”mw-parser-output”></div>”}
Choose one or two tissue colors. If you want a simple, classic look, choose pink, red or coral orange paper. For a two-color rose, you will take an extra sheet of paper of a different color. Some color combinations that create highlights are pink and red or dark orange and light orange. [8] X Research Sources
Cut one or two pieces of paper about 9-10cm long. To make the main petals, you will cut a piece of paper 9-10cm long the length of the tissue. Cut an extra piece of paper 9-10cm long on top of the highlighted colored paper as you have chosen. [9] X Research Source
Fold two stacked pieces of paper in half. Place the highlighted piece of paper on top of the main piece of paper and fold both sheets of paper with the highlight color inside the fold. Then fold on the folded piece of paper like a fan, you will change the folding direction for each horizontal fold about 2.5cm. [10] X Research Source
Use scissors to round off one end of the folded paper. Take a pair of scissors with sharp scissors and round off one end of the folded stack – choose the end with the uneven layer of paper. This will help you create the petal shape. [11] X Research Source When finished, gently unfold the folded piece of paper and lay it flat, with the right side of the petal facing up.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/5/51/Make-Tissue-Paper-Flowers-Step-11-Version-6.jpg/v4-460px-Make-Tissue- Paper-Flowers-Step-11-Version-6.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/5/51/Make-Tissue-Paper-Flowers-Step-11- Version-6.jpg/v4-728px-Make-Tissue-Paper-Flowers-Step-11-Version-6.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight” :410,”licensing”:”<div class=”mw-parser-output”></div>”}
Cut a wire 15 to 20cm long to make flower branches. Once you’ve created the flower spike, you can trim the wire if needed.
Apply glue to the edge of the paper towel. Using glue dots is best because it applies precisely and doesn’t get dirty, but you can also use a glue gun or craft glue. Make sure the glue is applied close to the point of contact between the flower stem and the petal.
Wrap a paper towel around the wire. Place the wire over the glue, then start wrapping the paper towel tightly. Holding firmly underneath the flower while wrapping the paper, collapse the exposed wrapping. Slowly loosen the wrap to create a blooming effect. [12] X Research Source
Secure the wrap position underneath the flowers with 15 to 20cm long bouquet tape. Wrap the tape a few times around the bottom of the flower, then wrap it diagonally down the stem. You need to wrap the tape tight enough to hold the paper rose in place. [13] X Research Source
Split and spread the petals. Edit the rose petals by gently separating the paper layers and spreading them outwards. This will make the flowers fuller and more realistic. [14] X Research Source
How to make hydrangeas with paper towels
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/0/0c/Make-Tissue-Paper-Flowers-Step-16-Version-6.jpg/v4-460px-Make-Tissue- Paper-Flowers-Step-16-Version-6.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/0/0c/Make-Tissue-Paper-Flowers-Step-16- Version-6.jpg/v4-728px-Make-Tissue-Paper-Flowers-Step-16-Version-6.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight” :410,”licensing”:”<div class=”mw-parser-output”></div>”}
Prepare several sheets of colored paper towels to make flowers. If you want to make a classic hydrangea, choose light blue, purple, light green or pink. You can also get more green paper towels if you want to make leaves.
Cut out 120 teardrop shaped petals. Fold the paper towel until it forms a stack of paper 2.5cm wide. Then use sharp scissors to cut the teardrop-shaped petals. You will need about 120 petals to form the flower. [15] X Research Source
- You can also make the petals any size you want, but 2.5cm is usually the actual size.
Cut and bundle 30 wires of wire to make the base for the flowers. Cut the wire about 15-20cm long and bundle it neatly. Wrap the wire bundle with bouquet tape about 5cm from the top end of the bundle. [16] X Research Source
Unfold the top of the wire bundle. The wires on the outside will face outwards perpendicular to the wire bundle and the remaining wires will spread evenly. [17] X Research Source
Use a glue gun to glue the petals to the wire. Start by gluing the two petals to a piece of wire and then use tongs to bend the ends of the wire into a small circle. Glue the center of the circle, then add the petals to form the flower and hide the small circle of wire. Continue gluing the petals to the remaining wire until the flower is complete. [18] X Research Sources
- You can also glue double petals to add volume to the flower.
- Glue as many petals to the wire as you can – add petals where the zinc ends are exposed.
- If you’re making leaves, you’ll stick them underneath the flower spike.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/b/b3/Make-Tissue-Paper-Flowers-Step-21-Version-6.jpg/v4-460px-Make-Tissue- Paper-Flowers-Step-21-Version-6.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/b/b3/Make-Tissue-Paper-Flowers-Step-21- Version-6.jpg/v4-728px-Make-Tissue-Paper-Flowers-Step-21-Version-6.jpg”,”smallWidth”:460,”smallHeight”:259,”bigWidth”:728,”bigHeight” :410,”licensing”:”<div class=”mw-parser-output”></div>”}
Inflate the petals. For hydrangeas, you should not separate the petals too much, but only gently separate and rotate the petals after the glue has dried. This way, the flowers will look fuller and more natural.
Things you need
- Tissue
- Flower wire rope
- Glue (such as glue dots)
- Drag
- Bouquet tape
- Glue Guns
Advice
- Spray perfume on flowers made of tissue paper or put a drop of essential oil in the center of flowers to make flowers fragrant.
X
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 7,462 times.
Flowers made of tissue paper are beautiful decorations and used to decorate the party. This flower is eye-catching and colorful but inexpensive and very easy to make. Choose a flower like a dahlia, rose, or hydrangea and follow the instructions. To stack these different types of flowers, you will need materials such as paper towels, scissors, wire rope, and glue.
Thank you for reading this post How to Make Flowers with Tissues at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: