You are viewing the article How to Set Up the Internet at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
X
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 2,995 times.
Depending on whether your network is a cable connection or a DSL service, the setup operation will be different. Click here for instructions on setting up a wired network and click here for instructions on setting up a DSL connection. If you’re unsure about the type of connection you’re using, you’ll need to contact your network service provider.
Steps
Set up a wired network
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/e/e9/Set-Up-an-Internet-Connection-Step-1-Version-2.jpg/v4-460px-Set- Up-an-Internet-Connection-Step-1-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/e/e9/Set-Up-an-Internet- Connection-Step-1-Version-2.jpg/v4-728px-Set-Up-an-Internet-Connection-Step-1-Version-2.jpg”,”smallWidth”:460,”smallHeight”:345,” bigWidth”:728,”bigHeight”:546,”licensing”:”<div class=”mw-parser-output”></div>”}
Plug the modem (modem) cable into the computer. Make sure the computer is located near a network outlet on the wall.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/b/b6/Set-Up-an-Internet-Connection-Step-2-Version-2.jpg/v4-460px-Set- Up-an-Internet-Connection-Step-2-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/b/b6/Set-Up-an-Internet- Connection-Step-2-Version-2.jpg/v4-728px-Set-Up-an-Internet-Connection-Step-2-Version-2.jpg”,”smallWidth”:460,”smallHeight”:345,” bigWidth”:728,”bigHeight”:546,”licensing”:”<div class=”mw-parser-output”></div>”}
Plug the modem cable into a network wall outlet.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/9/92/Set-Up-an-Internet-Connection-Step-3-Version-2.jpg/v4-460px-Set- Up-an-Internet-Connection-Step-3-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/9/92/Set-Up-an-Internet- Connection-Step-3-Version-2.jpg/v4-728px-Set-Up-an-Internet-Connection-Step-3-Version-2.jpg”,”smallWidth”:460,”smallHeight”:345,” bigWidth”:728,”bigHeight”:546,”licensing”:”<div class=”mw-parser-output”></div>”}
Plug in the power to the modem. Most modems do not have an On/Off switch. To turn the device on/off, simply plug and unplug it.
- The modem after turning on will go through the boot process. If the light on the modem is almost all lit and stops blinking, the device has finished booting. Usually only one light will continue to blink.
- Normally, it will take about 30-60 seconds for the modem to be fully turned on.
- If it’s a new modem, you’ll need to call your carrier and provide your modem information, as they won’t be able to help if the device isn’t linked to your account. Look for the modem’s serial number and MAC address printed on the bottom or side of the modem. [1] X Research Source
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/6/6e/Set-Up-an-Internet-Connection-Step-4-Version-2.jpg/v4-460px-Set- Up-an-Internet-Connection-Step-4-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/6/6e/Set-Up-an-Internet- Connection-Step-4-Version-2.jpg/v4-728px-Set-Up-an-Internet-Connection-Step-4-Version-2.jpg”,”smallWidth”:460,”smallHeight”:345,” bigWidth”:728,”bigHeight”:546,”licensing”:”<div class=”mw-parser-output”></div>”}
Check internet connection. Open a browser and go to some website you have visited recently, the web page will be loaded from the cache. If the website is loaded successfully, you have access to the network. If not, complete the rest of the process.
- Finding certain keywords on a search engine is also a good way to check the network.
Set up a DSL network
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/0/09/Set-Up-an-Internet-Connection-Step-5-Version-2.jpg/v4-460px-Set- Up-an-Internet-Connection-Step-5-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/0/09/Set-Up-an-Internet- Connection-Step-5-Version-2.jpg/v4-728px-Set-Up-an-Internet-Connection-Step-5-Version-2.jpg”,”smallWidth”:460,”smallHeight”:345,” bigWidth”:728,”bigHeight”:546,”licensing”:”<div class=”mw-parser-output”></div>”}
Plug the DSL modem into the computer. Make sure the computer is located near a network outlet on the wall.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/8/83/Set-Up-an-Internet-Connection-Step-6.jpg/v4-460px-Set-Up-an- Internet-Connection-Step-6.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/8/83/Set-Up-an-Internet-Connection-Step-6.jpg/ v4-728px-Set-Up-an-Internet-Connection-Step-6.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight”:546,”licensing”:” <div class=”mw-parser-output”></div>”}
Plug the cord of the DSL modem into a network wall outlet.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/0/05/Set-Up-an-Internet-Connection-Step-7.jpg/v4-460px-Set-Up-an- Internet-Connection-Step-7.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/0/05/Set-Up-an-Internet-Connection-Step-7.jpg/ v4-728px-Set-Up-an-Internet-Connection-Step-7.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight”:546,”licensing”:” <div class=”mw-parser-output”></div>”}
Plug in the DSL modem. Most modems do not have an On/Off switch. To turn the device on/off, simply plug and unplug it.
- The modem after turning on will go through the boot process. If the light on the modem is almost all lit and stops blinking, the device has finished booting. Usually only one light will continue to blink.
- Normally, it will take about 30-60 seconds for the modem to be fully turned on.
- For new modems, you need to call your DSL service provider to ask to link the modem with a network user account and password. If you do not know this information, call your service provider to ask.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/7/73/Set-Up-an-Internet-Connection-Step-8.jpg/v4-460px-Set-Up-an- Internet-Connection-Step-8.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/7/73/Set-Up-an-Internet-Connection-Step-8.jpg/ v4-728px-Set-Up-an-Internet-Connection-Step-8.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight”:546,”licensing”:” <div class=”mw-parser-output”></div>”}
Log in to the modem’s administrator screen. Open your web browser. In the address field, enter the IP address of the modem (usually printed on the device or in the user manual).
- Common IP addresses are 192.168.0.1 and 192.168.1.1. Click here for a list of specific IP addresses.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/e/e2/Set-Up-an-Internet-Connection-Step-9.jpg/v4-460px-Set-Up-an- Internet-Connection-Step-9.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/e/e2/Set-Up-an-Internet-Connection-Step-9.jpg/ v4-728px-Set-Up-an-Internet-Connection-Step-9.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight”:546,”licensing”:” <div class=”mw-parser-output”></div>”}
Enter the DSL network user account and password. Once connected to your modem’s admin screen, look for the PPPoE field. Enter your username and password in the PPPoE field. The username is usually the email address.
- If you do not know your user account name and password, contact your DSL operator.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/b/b2/Set-Up-an-Internet-Connection-Step-10.jpg/v4-460px-Set-Up-an- Internet-Connection-Step-10.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/b/b2/Set-Up-an-Internet-Connection-Step-10.jpg/ v4-728px-Set-Up-an-Internet-Connection-Step-10.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight”:546,”licensing”:” <div class=”mw-parser-output”></div>”}
Save settings. Save the settings after the setup is complete. The internet light on the modem will turn green, indicating that you are online.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/3/37/Set-Up-an-Internet-Connection-Step-11.jpg/v4-460px-Set-Up-an- Internet-Connection-Step-11.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/3/37/Set-Up-an-Internet-Connection-Step-11.jpg/ v4-728px-Set-Up-an-Internet-Connection-Step-11.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight”:546,”licensing”:” <div class=”mw-parser-output”></div>”}
Check internet connection. Open the browser and go to some website you have visited recently, the web page will be loaded from the program memory. If the website is loaded successfully, you have access to the network. If not, complete the rest of the process.
- Finding certain keywords on a search engine is also a good way to check the network.
IP addresses of some common modems and routers
- Alcatel SpeedTouch Home/Pro – 10.0.0.138 (no default password)
- Alcatel SpeedTouch 510/530/570 – 10.0.0.138 (no default password)
- Asus RT-N16 – 192.168.1.1 (default password is “admin”)
- Billion BIPAC-711 CE – 192.168.1.254 (default password is “admin”)
- Billion BIPAC-741 GE – 192.168.1.254 (default password is “admin”)
- Billion BIPAC-743 GE – 192.168.1.254 (default password is “admin”)
- Billion BIPAC-5100 – 192.168.1.254 (default password is “admin”)
- Billion BIPAC-7500G – 192.168.1.254 (default password is “admin”)
- Dell Wireless Router 2300 – 192.168.2.1 (the .1 extension is *fixed*)
- D-Link DSL-302G – 10.1.1.1 (Ethernet port) or 10.1.1.2 (USB port)
- D-Link DSL-500 – 192.168.0.1 (default password is “private”)
- D-Link DSL-504 – 192.168.0.1 (default password is “private”)
- D-Link DSL-604+ – 192.168.0.1 (default password is “private”)
- DrayTek Vigor 2500 – 192.168.1.1
- DrayTek Vigor 2500We – 192.168.1.1
- DrayTek Vigor 2600 – 192.168.1.1
- DrayTek Vigor 2600We – 192.168.1.1
- Dynalink RTA300 – 192.168.1.1
- Dynalink RTA300W – 192.168.1.1
- Netcomm NB1300 – 192.168.1.1
- Netcomm NB1300Plus4 – 192.168.1.1
- Netcomm NB3300 – 192.168.1.1
- Netcomm NB6 – 192.168.1.1 (default username is “admin,” default password is “admin”)
- Netcomm NB6PLUS4W – 192.168.1.1 (default username is “admin,” default password is “admin,” default WEP key is “a1b2c3d4e5”)
- Netgear DG814 – 192.168.0.1
- Netgear DGN2000 – 192.168.0.1 (default username is “admin,” default password is “password”)
- Web Excel PT-3808 – 10.0.0.2
- Web Excel PT-3812 – 10.0.0.2 [2] X Research Sources
X
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
This article has been viewed 2,995 times.
Depending on whether your network is a cable connection or a DSL service, the setup operation will be different. Click here for instructions on setting up a wired network and click here for instructions on setting up a DSL connection. If you’re unsure about the type of connection you’re using, you’ll need to contact your network service provider.
Thank you for reading this post How to Set Up the Internet at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: