You are viewing the article Fix dry ink pens: Blackboard pens, marker pens and others at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
X
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
There are 12 references cited in this article that you can view at the bottom of the page.
This article has been viewed 2,058 times.
Have you ever needed to write or draw something but the brush you are using is blurry or dry? Instead of throwing it away as soon as the pen stops producing ink, there are a few ways you can try to revive it. This article will tell you all the most effective ways to treat whiteboard markers, oil-based markers, and water-based markers so that the ink is bright and legible!
- With a marker pen: use pliers to pull out the nib and turn it back into the pen. Alternatively, you can tie the string to the pen and spin it around to push the ink to the tip of the pen.
- For oil-based or alcohol-based markers: soak the tip in rubbing alcohol to re-wet it. You can try putting rubbing alcohol on the pen.
- For water-based markers: dip the tip in water before writing. You can also spray glycerin on the tip of the pen or drip water on the pen.
Steps
Blackboard marker
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/1/1f/Revive-Dried-Out-Markers-Step-1-Version-4.jpg/v4-460px-Revive-Dried- Out-Markers-Step-1-Version-4.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/1/1f/Revive-Dried-Out-Markers-Step-1- Version-4.jpg/v4-728px-Revive-Dried-Out-Markers-Step-1-Version-4.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight” :546,”licensing”:”<div class=”mw-parser-output”></div>”}
Pull out the nib and reverse it if you need a quick fix. Use sharp-beak pliers to clamp the tip of the marker and pull it straight out of the pen body. Turn the nib upside down 180 degrees so that the inner nib is facing out, then carefully insert the nib into the pen body to reuse. [1] X Research Source
- This works best for flat-tipped markers.
- Remove the nib from the sink or spread a few sheets of tissue on the table to prevent any remaining ink from spilling out.
- The ink will soak into the dry end of the nib, so if the pen ever dries up, you can turn the tip upside down again.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/6/6f/Revive-Dried-Out-Markers-Step-2-Version-4.jpg/v4-460px-Revive-Dried- Out-Markers-Step-2-Version-4.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/6/6f/Revive-Dried-Out-Markers-Step-2- Version-4.jpg/v4-728px-Revive-Dried-Out-Markers-Step-2-Version-4.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight” :546,”licensing”:”<div class=”mw-parser-output”></div>”}
Tie the string to the tip of the pen and spin it around to push the ink into the tip. Secure the pen cap tightly, then wrap a piece of string or floss around the tip of the pen. Use paper tape to fix the rope, leaving a piece of wire about 30-60 cm long. Hold the end of the rope to spin the pen for about 10-15 seconds overhead, kind of like someone spinning a noose to catch an animal. [2] X Research Source
- The force of rotation will push the ink back to the tip of the pen, so that the pen can write again.
- You can hold the pen and shake it for the same result.
- If you need to handle a lot of whiteboard markers with dry ink, you can plug the pens into the cup, the tip of the pen facing down. Stick the wire on the outside of the cup and spin it quickly. The force of rotating the cup will keep the pen from falling off.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/b/b9/Revive-Dried-Out-Markers-Step-3-Version-4.jpg/v4-460px-Revive-Dried- Out-Markers-Step-3-Version-4.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/b/b9/Revive-Dried-Out-Markers-Step-3- Version-4.jpg/v4-728px-Revive-Dried-Out-Markers-Step-3-Version-4.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight” :546,”licensing”:”<div class=”mw-parser-output”></div>”}
Add more ink if your pen is refillable. Buy whiteboard pen ink of the same color as the pen. Remove the tip of the pen body and place it upright on the table. Use the dropper to fill the pen body with ink until it’s full, then screw the tip back on. [3] X Research Sources
- If your pen isn’t removable, it’s probably best to go buy a new one.
Oil-based brushes and alcohol-based brushes
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/5/5e/Revive-Dried-Out-Markers-Step-4-Version-4.jpg/v4-460px-Revive-Dried- Out-Markers-Step-4-Version-4.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/5/5e/Revive-Dried-Out-Markers-Step-4- Version-4.jpg/v4-728px-Revive-Dried-Out-Markers-Step-4-Version-4.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight” :546,”licensing”:”<div class=”mw-parser-output”></div>”}
Soak the brush tip in rubbing alcohol to re-wet it. Pour 90 degree rubbing alcohol into a cup small enough to cover the tip of the brush. Insert the tip of the pen and hold the pen upright so that the tip is submerged in alcohol. Leave it like that until you see the ink start to come out. After that, you just need to take out the pen, close the cap and wait 15 minutes before using it. [4] X Research Sources
- Stick the pen to the side of a cup or lean it against an object so that it stands upright.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/a/a3/Revive-Dried-Out-Markers-Step-5-Version-2.jpg/v4-460px-Revive-Dried- Out-Markers-Step-5-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/a/a3/Revive-Dried-Out-Markers-Step-5- Version-2.jpg/v4-728px-Revive-Dried-Out-Markers-Step-5-Version-2.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight” :546,”licensing”:”<div class=”mw-parser-output”></div>”}
Add rubbing alcohol to the brush to draw out the remaining ink in the pen. Use sharp beak pliers to clip just above the nib. Gently pull the nib away from the pen body to see the pen inside. Pour alcohol into the dropper and squeeze a few drops of alcohol into the open end of the pen. Reinsert the pen and wait 1-2 minutes before using it again. [5] X Research Sources
- Be careful when handling the pen as it can spill ink into your hand.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/1/12/Revive-Dried-Out-Markers-Step-6-Version-2.jpg/v4-460px-Revive-Dried- Out-Markers-Step-6-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/1/12/Revive-Dried-Out-Markers-Step-6- Version-2.jpg/v4-728px-Revive-Dried-Out-Markers-Step-6-Version-2.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight” :546,”licensing”:”<div class=”mw-parser-output”></div>”}
Cover the pen cap and plug the pen tip down to keep the tip wet when not in use. Oil-based markers and alcohol-based markers can dry out when you leave the pen horizontal or in the tube with the tip facing up. Tighten the pen cap and insert the pen into the cup or pen holder, the pen tip facing down. This way, gravity will pull the ink down to the tip of the pen and you can write right away. [6] X Research Sources
Water-based brush
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/6/6f/Revive-Dried-Out-Markers-Step-7-Version-2.jpg/v4-460px-Revive-Dried- Out-Markers-Step-7-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/6/6f/Revive-Dried-Out-Markers-Step-7- Version-2.jpg/v4-728px-Revive-Dried-Out-Markers-Step-7-Version-2.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight” :546,”licensing”:”<div class=”mw-parser-output”></div>”}
Dip the tip of the pen in warm water to wet the tip before use. Keep a small cup of warm water nearby when you need to use a marker. If the pen dries out and writes poorly, quickly dip the tip of the pen in warm water and shake off the water. The water will help the ink soak through the tip of the pen more easily and make it easier to write. [7] X Research Sources
- This also works with highlighters as they are also water-based.
- After using the pen, dip the tip of the pen in water for about 5 seconds before putting the cap back on. Then wait 1 day before taking it again. [8] X Research Sources
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/a/aa/Revive-Dried-Out-Markers-Step-8-Version-2.jpg/v4-460px-Revive-Dried- Out-Markers-Step-8-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/a/aa/Revive-Dried-Out-Markers-Step-8- Version-2.jpg/v4-728px-Revive-Dried-Out-Markers-Step-8-Version-2.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight” :546,”licensing”:”<div class=”mw-parser-output”></div>”}
Try spraying a glycerin solution on the nib for a quick fix. Mix 1 part glycerin with 3 parts water in a small spray bottle. Spray a glycerin solution on the tip of the pen right before use to help the ink flow easily through the nib. [9] X Research Source
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/4/4d/Revive-Dried-Out-Markers-Step-9-Version-2.jpg/v4-460px-Revive-Dried- Out-Markers-Step-9-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/4/4d/Revive-Dried-Out-Markers-Step-9- Version-2.jpg/v4-728px-Revive-Dried-Out-Markers-Step-9-Version-2.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight” :546,”licensing”:”<div class=”mw-parser-output”></div>”}
Fill the pen with water to re-wet the ink remaining in the pen. Use sharp-beaked pliers to clamp the nib and carefully pull it straight out of the pen body. Hold the pen upright and put a few drops of water on the pen body and nib. Then plug the nib back in and try writing. [10] X Research Source
- Avoid overfilling the pen with water as the ink will be diluted and blurred.
{“smallUrl”:”https://www.wikihow.com/images_en/thumb/4/49/Revive-Dried-Out-Markers-Step-10-Version-2.jpg/v4-460px-Revive-Dried- Out-Markers-Step-10-Version-2.jpg”,”bigUrl”:”https://www.wikihow.com/images/thumb/4/49/Revive-Dried-Out-Markers-Step-10- Version-2.jpg/v4-728px-Revive-Dried-Out-Markers-Step-10-Version-2.jpg”,”smallWidth”:460,”smallHeight”:345,”bigWidth”:728,”bigHeight” :546,”licensing”:”<div class=”mw-parser-output”></div>”}
Plug the pen tip into the cup to recover the pen in 1 day. When you’re done using the pen, close the cap tightly and insert the tip into the cup or pen holder. After a day, gravity will help the remaining ink in the pen to flow down to the tip of the pen and be able to write. [11] X Research Source
Advice
- Wear gloves while fixing the brush so you don’t get your hands dirty.
- Close the pen cap tightly when not in use to prevent the tip from drying out. [12] X Research Source
Warning
- If the brush still doesn’t write after you have corrected it with the above methods, it is possible that the ink has completely run out and needs to be replaced.
Things you need
Blackboard marker
- Sharp beak pliers
- Wire or floss
- Paper Tape
- Blackboard marker pen ink
- Dropper
Oil-based brushes and alcohol-based brushes
- Sharp beak pliers
- Cleaning alcohol
- Dropper
Water-based brush
- Glycerin
- Small spray bottle
- Sharp beak pliers
X
This article is co-authored by a team of editors and trained researchers who confirm the accuracy and completeness of the article.
The wikiHow Content Management team carefully monitors the work of editors to ensure that every article is up to a high standard of quality.
There are 12 references cited in this article that you can view at the bottom of the page.
This article has been viewed 2,058 times.
Have you ever needed to write or draw something but the brush you are using is blurry or dry? Instead of throwing it away as soon as the pen stops producing ink, there are a few ways you can try to revive it. This article will tell you all the most effective ways to treat whiteboard markers, oil-based markers, and water-based markers so that the ink is bright and legible!
Thank you for reading this post Fix dry ink pens: Blackboard pens, marker pens and others at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: