You are viewing the article How to Adjust Watch Bands at Lassho.edu.vn you can quickly access the necessary information in the table of contents of the article below.
wikiHow is a “wiki” site, which means that many of the articles here are written by multiple authors. To create this article, 13 people, some of whom are anonymous, have edited and improved the article over time.
This article has been viewed 12,930 times.
Today, many wristwatches are designed with bracelets made of leather or plastic, which have a row of holes along with a buckle that allows the user to easily adjust the size. However, many trendy watch brands and metal watches require us to remove the metal eye to make the strap smaller. This may sound difficult at first, but with just a few simple tools, you can completely do it yourself at home without having to waste time and money when taking your watch to a jeweler or repair place.
Steps
Measure the watch band
- If the watch is loose to the wrist, you need to remove quite a few eyes.
- If the watch is just a little loose, isn’t too uncomfortable to wear, and isn’t to the point of slipping out of your hand, adjustment may not be necessary.
- If the watch is too tight, you will need to purchase additional links from the manufacturer to expand the band.
- You need to make sure that the number of links to be removed is the same on each side of the clasp.
- This is to ensure that the watch face remains in the center of the strap.
- Write down the number of links to be removed on each side of the clasp.
- One or two latching tools. You will use them to push the pin that secures the links out of the hole.
- Small nose pliers, help you pull the pin out.
- Small hammer, jeweler’s type.
- Make sure your work surface is flat and well lit. You need to collect all the pins that you removed from the rope.
Remove the eye of the strap
- Count the number of links that need to be removed, calculate the key word.
- Find the position of the last link fixing pin.
- This is where you need to proceed to remove the eye.
- Press the pointed end of the pin remover onto the pin end.
- If you don’t have enough force, you can use a hammer to drive the dowel remover into the hole to push the pin out of the hole.
- A piece of pin will protrude from the other side of the eye.
- Continue, use the hammer to nail the protruding pin further.
- Once the pin pops out of the hole long enough for the tip of the pliers to grip, you can use pliers to remove it.
- Use small nose pliers to clamp the pin.
- Pull out the latch.
- At this point, the number of eyes you need to remove on one side of the clasp will come off.
- Repeat the process with the other side of the rope.
- Use the same method as when you removed the link.
- The clasp is also connected to the link by a pin. You just need to use a hammer, push pin and pliers to remove the nail.
- Then, reattach the clasp to the strap.
- You will see a hole to install the hook securing pin.
- Take one of the dowels you removed and insert it into this hole.
- The pin should go through the hole with ease, only stopping slightly near the end.
- Use a hammer to gently drive the flood pin into the hole.
- Repeat the process for the other side of the clasp.
- So your watch band has been properly aligned.
- If you accidentally remove more links than necessary, try to reattach each eye on each side of the wire.
- If you haven’t removed enough links, re-measure how many links you need to remove to make the watch tighter but still comfortable.
- Wear the watch for a few days to make sure it’s comfortable.
Advice
- Do not poke people with screwdrivers.
- Choose a hard surface to limit movement of the watch while you make adjustments to the strap.
Things you need
- Latching tool
- Hammer
- Small nose pliers.
- Watches with adjustable straps
wikiHow is a “wiki” site, which means that many of the articles here are written by multiple authors. To create this article, 13 people, some of whom are anonymous, have edited and improved the article over time.
This article has been viewed 12,930 times.
Today, many wristwatches are designed with bracelets made of leather or plastic, which have a row of holes along with a buckle that allows the user to easily adjust the size. However, many trendy watch brands and metal watches require us to remove the metal eye to make the strap smaller. This may sound difficult at first, but with just a few simple tools, you can completely do it yourself at home without having to waste time and money when taking your watch to a jeweler or repair place.
Thank you for reading this post How to Adjust Watch Bands at Lassho.edu.vn You can comment, see more related articles below and hope to help you with interesting information.
Related Search: