7 simple and quick ways to clean moldy walls

Moldy walls have many causes from the weather, because the walls are not waterproof, .. If you are looking for a way to clean moldy walls, please refer to the article below.

Bleach Javel

You dilute the Javel solution at the rate of 1 liter of bleach with 2 liters of clean water to use for 20 square meters of wall.

Then you use a paint roller to dip into the solution and roll on the moldy wall, then use a brush to clean the mold stains. When the mold stains are clean, you wash the wall with clean water and then use a fan to blow on the wall, open the doors to let the chemical smell out quickly.

Note that during the cleaning process, you should wear gloves to avoid damaging the skin of your hands!

Fresh lemon

Fresh lemon contains a large amount of citric acid , so the cleaning effect of fresh lemon is great. Use clean water to wash the wall. Then use fresh lemon to rub on the moldy area or you can use lemon juice to apply, then use a brush to scrub the mold spots.

Finally, you use a clean dry towel to wipe the wet part of the wall and you’re done, it’s that simple, isn’t it.

Vinegar and baking soda

Similar to lemon, vinegar also has acidic properties and strong cleaning ability, when combined with baking soda, it can fly away mold in a very simple way.

You just need to mix baking soda and vinegar into a thick paste, then use a brush, brush a little of this mixture on and then rub it hard on the moldy area, when you have scrubbed, wait 10 to 15 minutes and then use water. Clean, rinse and dry the wall, you will see the amazing effect.

Soap

Use soap diluted with water in a ratio of 1: 3 , note that when using powdered soap, you must dissolve all soap to clean more effectively. Then, use a brush to absorb the solution and rub it on the moldy wall and then rinse it with water.

Soap can be used to treat mold, but the effect is not high , it can only be used when the condition of moss is not severe.

Hydrogen peroxide

Cleaning moldy walls with hydrogen peroxide is quite simple, but the effect is great. You must use a pure 3% hydrogen peroxide solution, spray on the moldy plaques.

After that, wait about 10 minutes for the hydrogen peroxide solution to penetrate into the mold, then use a clean towel to dry it, it’s simple to clean the wall, isn’t it.

Kitchen ashes

Coal stove ash mixed with a little water, then use a brush to gently scrub the moldy or yellowed walls, wait 5 minutes , then rub again and rinse with water.

Kitchen ash contains mainly alkaline substances , which can be used to remove stains and light mold, so try using kitchen ash to clean the walls or floor to see how effective it is!

borax

Hanh is a natural cleanser, so when used, there are no side effects, but the method is also very simple . Just mix the borax with the ratio of 3 liters of water to 1 cup of borax , then use a brush, dip the scrub solution on the stains, mold and then wipe it with clean water.

This method will help kill bacteria, prevent the growth of mold effectively, at the root!

Hopefully the 7 ways to clean the walls when moldy that we have just shared have helped you choose how to clean the walls quickly. If you have any other questions, please leave a comment so we can answer!

You may be interested in:

• Keep the walls of the house clean as new with just dishwashing liquid
• 7 tips to remove adhesive tape stains on the wall with ingredients available at home
• How to prevent mold on walls and floors after storms?

Good experience lassho.edu.vn