3 Ways to Pair Aftershokz – TV To Talk About

Connecting your AfterShokz with any device is simple, as long as you follow the instructions explained in this guide. If you want to switch devices or connect with new ones, you can easily do so with AfterShokz and continue enjoying your listening experience better.

If your device uses Bluetooth Version 3.1 or lower, you can’t connect with it. Only Bluetooth devices with version 3.1 or higher can successfully pair with AfterShokz headphones and headsets. You can also use a device with Bluetooth version 3.1 and above to connect AfterShokz headphones to a Smart TV.

What if your TV doesn’t have Bluetooth? You’ll need a Bluetooth transmitter to connect it with AfterShokz.

How to Connect AfterShokz with iPhone

It’s useful to know how to pair your AfterShokz to your device, whether you just got your headphones, got a new phone, or lost connectivity.

To start connecting to your AfterShokz, begin by turning off your headphones. Press and hold the volume+ button for 5-7 seconds to enter pairing mode. Once your device says “Welcome to AfterShokz,” know for sure that you’ve successfully connected. Hold the power button down until the LED light turns red and blue.

Select your headphones from the Bluetooth Settings in your Settings menu, and then your device says “Connected.” Your iPhone and headphones should connect.

How to pair AfterShokz with Android

Remove your headphones first. Press and hold volume+ until Audrey says “pairing,” and the LED indicator flashes red and blue; you’ve entered pairing mode. Select your headphones from the Bluetooth menu on your device.” It’ll say “Connected,” and the LED indicator will flash blue once.

How to pair AfterShokz to multiple devices

To connect AfterShokz to multiple devices, you need to enable Multipoint pairing. Thank goodness Multipoint pairing is available on AfterShokz headphones, allowing users to connect to two or more devices simultaneously. Though you won’t hear audio from those multiple devices simultaneously, switching between them will be simple.

To use multipoint pairing to connect multiple devices, follow these steps:

• Turn off your headphones to begin.

• Press and hold the volume+ button for 5-7 seconds, or until the LED light flashes red and blue, to enter pairing mode.

• For 2-3 seconds, press and hold the multifunction and volume+ buttons. “Multipoint Enabled,” Audrey says.

• Connect the first device. “Connected,” it says.

• Turn off your headphones.

• Press and hold the volume+ button for 5-7 seconds, or until the LED light flashes red and blue, to re-enter pairing mode.

• Connect the second device to the first. “Device Two Connected,” it says.

• Remove your headphones.

These devices should now be paired with your headphones.

FAQs

Why won’t my AfterShokz pair?

Press and hold the Volume+ button for 5-7 seconds to enter pairing mode. After your headphones have turned on, the LED light will flash red and blue. Remove your headphones. Your headphones have been reset and are ready to be paired with your device again.

How do you pair AfterShokz?

Press and hold Volume+ until Audrey says “pairing,” and the LED indicator flashes red and blue to enter pairing mode. Open the Bluetooth menu on your device and select your headphones.” Audrey will say “connected,” and the LED indicator will briefly flash blue.

How do I reset my AfterShokz?

For 3-5 seconds, press and hold the Multifunction button, Volume+, and Volume- buttons simultaneously. You’ll notice beeps or vibrations. Remove your headphones. Your headphones have now been reset and can be paired with your device again.

Can I connect my AfterShokz to my computer?

Because of the open-ear design, many of our customers wear their AfterShokz to work! You can connect them to your laptop to listen to music or make Skype calls while staying connected to your colleagues.

A multifunction button comes with all AfterShokz wireless Bluetooth headphones and is located on the left transducer of your headphones. You can feel it by running your finger along with the transducer while wearing AfterShokz.

Can AfterShokz connect to TV?

When you connect AfterShokz to your TV, you can watch your favorite shows while remaining aware of your surroundings.

It can also help some people who are deafeningly deaf. Do you want to watch the latest episode with a friend? Look for a dual transmitter that allows you to pair two sets of headphones simultaneously.

How do I connect my AfterShokz to my new phone?

Press and hold Volume+ for 5-7 seconds to enter pairing mode. “Welcome to AfterShokz,” Audrey will say. Hold Volume+ down until the LED light flashes red and blue.

Open the Bluetooth settings on your device and select “Aeropex.” Audrey will respond, “Connected.” You should have connected your headphones to your device at this point.

How do I connect AfterShokz to two devices?

To pair multiple devices using multipoint pairing, first turn off your headphones. To enter pairing mode, press and hold the volume+ button for 5-7 seconds, or until the LED light flashes red and blue.

Hold down the multifunction and volume+ buttons for 2-3 seconds. Connect the first device. Repeat the previous steps for the second device you want to pair.

Why are my AfterShokz blinking red and blue?

However, if your headphones are flashing red and blue, it means they are no longer paired with your device. This indicates that your headphones are looking for another Bluetooth device to pair with. When headphones are in pairing mode, they may attempt but fail to connect with another device.

The power button also serves as the volume+ button. It is not the multifunction button on the transducer’s side. Audrey will say, “Welcome to Titanium,” indicating that the headphones have been turned on. To turn off the headphones, press and hold the same button.